/*
* Copyright 2002-2003 Red Hat Inc., Durham, North Carolina.
*
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation on the rights to use, copy, modify, merge,
* publish, distribute, sublicense, and/or sell copies of the Software,
* and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NON-INFRINGEMENT. IN NO EVENT SHALL RED HAT AND/OR THEIR SUPPLIERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* Authors:
* Rickard E. (Rik) Faith <[email protected]>
*
*/
/** \file
*
* Routines that are common between #usb-keyboard.c, #usb-mouse.c, and
* #usb-other.c */
#ifdef HAVE_DMX_CONFIG_H
#include <dmx-config.h>
#endif
#include "usb-private.h"
#define USB_COMMON_DEBUG 1
/*****************************************************************************/
/* Define some macros to make it easier to move this file to another
* part of the Xserver tree. All calls to the dmx* layer are #defined
* here for the .c file. The .h file will also have to be edited. */
#include "usb-mouse.h"
#define GETPRIV myPrivate *priv \
= ((DMXLocalInputInfoPtr)(pDev->devicePrivate))->private
#define GETNAME ((DMXLocalInputInfoPtr)(pDevice->public.devicePrivate)) \
->name
#define LOG0(f) dmxLog(dmxDebug,f)
#define LOG1(f,a) dmxLog(dmxDebug,f,a)
#define LOG2(f,a,b) dmxLog(dmxDebug,f,a,b)
#define LOG3(f,a,b,c) dmxLog(dmxDebug,f,a,b,c)
#define LOG1INPUT(p,f,a) dmxLogInput(p->dmxInput,f,a)
#define LOG3INPUT(p,f,a,b,c) dmxLogInput(p->dmxInput,f,a,b,c)
#define LOG5INPUT(p,f,a,b,c,d,e) dmxLogInput(p->dmxInput,f,a,b,c,d,e)
#define FATAL0(f) dmxLog(dmxFatal,f)
#define FATAL1(f,a) dmxLog(dmxFatal,f,a)
#define FATAL2(f,a,b) dmxLog(dmxFatal,f,a,b)
#define MOTIONPROC dmxMotionProcPtr
#define ENQUEUEPROC dmxEnqueueProcPtr
#define CHECKPROC dmxCheckSpecialProcPtr
#define BLOCK DMXBlockType
/* End of interface definitions. */
/*****************************************************************************/
/** Read an event from the \a pDev device. If the event is a motion
* event, enqueue it with the \a motion function. Otherwise, enqueue
* the event with the \a enqueue function. The \a block type is passed
* to the functions so that they may block SIGIO handling as appropriate
* to the caller of this function.
*
* Since USB devices return EV_KEY events for buttons and keys, \a
* minButton is used to decide if a Button or Key event should be
* queued.*/
void usbRead(DevicePtr pDev,
MOTIONPROC motion,
ENQUEUEPROC enqueue,
int minButton,
BLOCK block)
{
GETPRIV;
struct input_event raw;
int v[DMX_MAX_AXES];
int axis;
#define PRESS(b) \
do { \
enqueue(pDev, ButtonPress, 0, 0, NULL, block); \
} while (0)
#define RELEASE(b) \
do { \
enqueue(pDev, ButtonRelease, 0, 0, NULL, block); \
} while (0)
while (read(priv->fd, &raw, sizeof(raw)) > 0) {
#if USB_COMMON_DEBUG > 1
LOG3("USB: type = %d, code = 0x%02x, value = %d\n",
raw.type, raw.code, raw.value);
#endif
switch (raw.type) {
case EV_KEY:
/* raw.value = 1 for first, 2 for repeat */
if (raw.code > minButton) {
if (raw.value) PRESS((raw.code & 0x0f) + 1);
else RELEASE((raw.code & 0x0f) + 1);
} else {
enqueue(pDev, raw.value ? KeyPress : KeyRelease,
0, 0, NULL, block);
}
break;
case EV_REL:
switch (raw.code) {
case REL_X:
v[0] = -raw.value;
v[1] = 0;
motion(pDev, v, 0, 2, DMX_RELATIVE, block);
break;
case REL_Y:
v[0] = 0;
v[1] = -raw.value;
motion(pDev, v, 0, 2, DMX_RELATIVE, block);
break;
case REL_WHEEL:
if ((int)raw.value > 0) {
PRESS(4);
RELEASE(4);
} else if ((int)raw.value < 0) {
PRESS(5);
RELEASE(5);
}
break;
default:
memset(v, 0, sizeof(v));
axis = priv->relmap[raw.code];
v[axis] = raw.value;
motion(pDev, v, axis, 1, DMX_RELATIVE, block);
}
break;
case EV_ABS:
memset(v, 0, sizeof(v));
axis = priv->absmap[raw.code];
v[axis] = raw.value;
motion(pDev, v, axis, 1, DMX_ABSOLUTE, block);
break;
}
}
}
#define test_bit(bit) (priv->mask[(bit)/8] & (1 << ((bit)%8)))
#define test_bits(bit) (bits[(bit)/8] & (1 << ((bit)%8)))
static void usbPrint(myPrivate *priv,
const char *filename, const char *devname, int fd)
{
int j, k;
DeviceIntPtr pDevice = priv->pDevice;
unsigned char bits[KEY_MAX/8 + 1]; /* RATS: Use ok assuming that
* KEY_MAX is greater than
* REL_MAX, ABS_MAX, SND_MAX, and
* LED_MAX. */
LOG3INPUT(priv, "%s (%s) using %s\n", pDevice->name, GETNAME, filename);
LOG1INPUT(priv, " %s\n", devname);
for (j = 0; j < EV_MAX; j++) {
if (test_bit(j)) {
const char *type = "unknown";
char extra[256]; /* FIXME: may cause buffer overflow */
extra[0] = '\0';
switch(j) {
case EV_KEY: type = "keys/buttons"; break;
case EV_REL: type = "relative";
memset(bits, 0, sizeof(bits));
ioctl(priv->fd, EVIOCGBIT(EV_REL, sizeof(bits)), bits);
for (k = 0; k < REL_MAX; k++) {
if (test_bits(k)) switch (k) {
case REL_X: strcat(extra, " X"); break;
case REL_Y: strcat(extra, " Y"); break;
case REL_Z: strcat(extra, " Z"); break;
case REL_HWHEEL: strcat(extra, " HWheel"); break;
case REL_DIAL: strcat(extra, " Dial"); break;
case REL_WHEEL: strcat(extra, " Wheel"); break;
case REL_MISC: strcat(extra, " Misc"); break;
}
}
break;
case EV_ABS: type = "absolute";
memset(bits, 0, sizeof(bits));
ioctl(priv->fd, EVIOCGBIT(EV_ABS, sizeof(bits)), bits);
for (k = 0; k < ABS_MAX; k++) {
if (test_bits(k)) switch (k) {
case ABS_X: strcat(extra," X"); break;
case ABS_Y: strcat(extra," Y"); break;
case ABS_Z: strcat(extra," Z"); break;
case ABS_RX: strcat(extra," RX"); break;
case ABS_RY: strcat(extra," RY"); break;
case ABS_RZ: strcat(extra," RZ"); break;
case ABS_THROTTLE: strcat(extra," Throttle");break;
case ABS_RUDDER: strcat(extra," Rudder"); break;
case ABS_WHEEL: strcat(extra," Wheel"); break;
case ABS_GAS: strcat(extra," Gas"); break;
case ABS_BRAKE: strcat(extra," Break"); break;
case ABS_HAT0X: strcat(extra," Hat0X"); break;
case ABS_HAT0Y: strcat(extra," Hat0Y"); break;
case ABS_HAT1X: strcat(extra," Hat1X"); break;
case ABS_HAT1Y: strcat(extra," Hat1Y"); break;
case ABS_HAT2X: strcat(extra," Hat2X"); break;
case ABS_HAT2Y: strcat(extra," Hat2Y"); break;
case ABS_HAT3X: strcat(extra," Hat3X"); break;
case ABS_HAT3Y: strcat(extra," Hat3Y"); break;
case ABS_PRESSURE: strcat(extra," Pressure");break;
case ABS_DISTANCE: strcat(extra," Distance");break;
case ABS_TILT_X: strcat(extra," TiltX"); break;
case ABS_TILT_Y: strcat(extra," TiltY"); break;
case ABS_MISC: strcat(extra," Misc"); break;
}
}
break;
case EV_MSC: type = "reserved"; break;
case EV_LED: type = "leds";
memset(bits, 0, sizeof(bits));
ioctl(priv->fd, EVIOCGBIT(EV_LED, sizeof(bits)), bits);
for (k = 0; k < LED_MAX; k++) {
if (test_bits(k)) switch (k) {
case LED_NUML: strcat(extra," NumLock"); break;
case LED_CAPSL: strcat(extra," CapsLock"); break;
case LED_SCROLLL: strcat(extra," ScrlLock"); break;
case LED_COMPOSE: strcat(extra," Compose"); break;
case LED_KANA: strcat(extra," Kana"); break;
case LED_SLEEP: strcat(extra," Sleep"); break;
case LED_SUSPEND: strcat(extra," Suspend"); break;
case LED_MUTE: strcat(extra," Mute"); break;
case LED_MISC: strcat(extra," Misc"); break;
}
}
break;
case EV_SND: type = "sound";
memset(bits, 0, sizeof(bits));
ioctl(priv->fd, EVIOCGBIT(EV_SND, sizeof(bits)), bits);
for (k = 0; k < SND_MAX; k++) {
if (test_bits(k)) switch (k) {
case SND_CLICK: strcat(extra," Click"); break;
case SND_BELL: strcat(extra," Bell"); break;
}
}
break;
case EV_REP: type = "repeat"; break;
case EV_FF: type = "feedback"; break;
}
LOG5INPUT(priv, " Feature 0x%02x = %s%s%s%s\n", j, type,
extra[0] ? " [" : "",
extra[0] ? extra+1 : "",
extra[0] ? "]" : "");
}
}
}
/** Initialized \a pDev as a \a usbMouse, \a usbKeyboard, or \a usbOther
device. */
void usbInit(DevicePtr pDev, usbType type)
{
GETPRIV;
char name[64]; /* RATS: Only used in XmuSnprintf */
int i, j, k;
char buf[256] = { 0, }; /* RATS: Use ok */
int version;
unsigned char bits[KEY_MAX/8 + 1]; /* RATS: Use ok assuming that
* KEY_MAX is greater than
* REL_MAX, ABS_MAX, SND_MAX, and
* LED_MAX. */
if (priv->fd >=0) return;
for (i = 0; i < 32; i++) {
XmuSnprintf(name, sizeof(name), "/dev/input/event%d", i);
if ((priv->fd = open(name, O_RDWR | O_NONBLOCK, 0)) >= 0) {
ioctl(priv->fd, EVIOCGVERSION, &version);
ioctl(priv->fd, EVIOCGNAME(sizeof(buf)), buf);
memset(priv->mask, 0, sizeof(priv->mask));
ioctl(priv->fd, EVIOCGBIT(0, sizeof(priv->mask)), priv->mask);
for (j = 0; j < EV_MAX; j++) {
if (test_bit(j)) {
switch(j) {
case EV_REL:
memset(bits, 0, sizeof(bits));
ioctl(priv->fd, EVIOCGBIT(EV_REL, sizeof(bits)), bits);
for (k = 0; k < REL_MAX; k++) {
if (test_bits(k)) {
if (k == REL_X) priv->relmap[k] = 0;
else if (k == REL_Y) priv->relmap[k] = 1;
else priv->relmap[k] = 2 + priv->numAbs;
++priv->numRel;
}
}
break;
case EV_ABS:
memset(bits, 0, sizeof(bits));
ioctl(priv->fd, EVIOCGBIT(EV_ABS, sizeof(bits)), bits);
for (k = 0; k < ABS_MAX; k++) {
if (test_bits(k)) {
priv->absmap[k] = priv->numAbs;
++priv->numAbs;
}
}
break;
case EV_LED:
memset(bits, 0, sizeof(bits));
ioctl(priv->fd, EVIOCGBIT(EV_LED, sizeof(bits)), bits);
for (k = 0; k < LED_MAX; k++) {
if (test_bits(k)) ++priv->numLeds;
}
break;
}
}
}
switch (type) {
case usbMouse:
if (test_bit(EV_REL) && test_bit(EV_KEY))
goto found;
break;
case usbKeyboard:
if (test_bit(EV_KEY) && test_bit(EV_LED) && !test_bit(EV_ABS))
goto found;
break;
case usbOther:
if (!(test_bit(EV_REL) && test_bit(EV_KEY))
&& !(test_bit(EV_KEY) && test_bit(EV_LED)
&& !test_bit(EV_ABS)))
goto found;
break;
}
close(priv->fd);
priv->fd = -1;
}
}
if (priv->fd < 0)
FATAL1("usbInit: Cannot open /dev/input/event* port (%s)\n"
" If you have not done so, you may need to:\n"
" rmmod mousedev; rmmod keybdev\n"
" modprobe evdev\n",
strerror(errno));
found:
usbPrint(priv, name, buf, priv->fd);
}
/** Turn \a pDev off (i.e., stop taking input from \a pDev). */
void usbOff(DevicePtr pDev)
{
GETPRIV;
if (priv->fd >= 0) close(priv->fd);
priv->fd = -1;
}
/** Create a private structure for use within this file. */
pointer usbCreatePrivate(DeviceIntPtr pDevice)
{
myPrivate *priv = xalloc(sizeof(*priv));
memset(priv, 0, sizeof(*priv));
priv->fd = -1;
priv->pDevice = pDevice;
return priv;
}
/** Destroy a private structure. */
void usbDestroyPrivate(pointer priv)
{
if (priv) xfree(priv);
}
|
