/***********************************************************
Copyright (c) 1987 X Consortium
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of the X Consortium shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from the X Consortium.
Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
All Rights Reserved
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Digital not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
******************************************************************/
/* GJA -- modified this file for vga16 */
#ifdef HAVE_XORG_CONFIG_H
#include <xorg-config.h>
#endif
#include <stdlib.h>
#include "xf4bpp.h"
#include "OScompiler.h"
#include "mfbmap.h"
#include "mfb.h"
#include "maskbits.h"
#include "mi.h"
#include "miline.h"
#include "vgaVideo.h"
#include "wm3.h"
#include "xf86str.h" /* for pScrn->vtSema */
extern ScrnInfoPtr *xf86Screens;
/* single-pixel lines on a color frame buffer
NON-SLOPED LINES
horizontal lines are always drawn left to right; we have to
move the endpoints right by one after they're swapped.
horizontal lines will be confined to a single band of a
region. the code finds that band (giving up if the lower
bound of the band is above the line we're drawing); then it
finds the first box in that band that contains part of the
line. we clip the line to subsequent boxes in that band.
vertical lines are always drawn top to bottom (y-increasing.)
this requires adding one to the y-coordinate of each endpoint
after swapping.
SLOPED LINES
when clipping a sloped line, we bring the second point inside
the clipping box, rather than one beyond it, and then add 1 to
the length of the line before drawing it. this lets us use
the same box for finding the outcodes for both endpoints. since
the equation for clipping the second endpoint to an edge gives us
1 beyond the edge, we then have to move the point towards the
first point by one step on the major axis.
eventually, there will be a diagram here to explain what's going
on. the method uses Cohen-Sutherland outcodes to determine
outsideness, and a method similar to Pike's layers for doing the
actual clipping.
*/
#ifdef POLYSEGMENT
static void DoV16SegmentSS(
DrawablePtr, GCPtr, int, xSegment*
);
void
xf4bppSegmentSS (pDrawable, pGC, nseg, pSeg)
DrawablePtr pDrawable;
GCPtr pGC;
int nseg;
register xSegment *pSeg;
{
if ( ! xf86Screens[pDrawable->pScreen->myNum]->vtSema ) {
miPolySegment(pDrawable, pGC, nseg, pSeg);
} else {
DO_WM3(pGC,DoV16SegmentSS (pDrawable, pGC, nseg, pSeg));
}
}
#else
static void DoV16LineSS(
DrawablePtr, GCPtr, int, int, DDXPointPtr
);
void
xf4bppLineSS (pDrawable, pGC, mode, npt, pptInit)
DrawablePtr pDrawable;
GCPtr pGC;
int mode; /* Origin or Previous */
int npt; /* number of points */
DDXPointPtr pptInit;
{
if ( ! xf86Screens[pDrawable->pScreen->myNum]->vtSema ) {
miZeroLine(pDrawable, pGC, mode, npt, pptInit);
} else {
DO_WM3(pGC,DoV16LineSS (pDrawable, pGC, mode, npt, pptInit));
}
}
#endif
static void
#ifdef POLYSEGMENT
DoV16SegmentSS (pDrawable, pGC, nseg, pSeg)
DrawablePtr pDrawable;
GCPtr pGC;
int nseg;
register xSegment *pSeg;
#else
DoV16LineSS (pDrawable, pGC, mode, npt, pptInit)
DrawablePtr pDrawable;
GCPtr pGC;
int mode; /* Origin or Previous */
int npt; /* number of points */
DDXPointPtr pptInit;
#endif
{
int nboxInit;
register int nbox;
BoxPtr pboxInit;
register BoxPtr pbox;
#ifndef POLYSEGMENT
register DDXPointPtr ppt; /* pointer to list of translated points */
#endif
unsigned int oc1; /* outcode of point 1 */
unsigned int oc2; /* outcode of point 2 */
PixelType *addrlBase; /* pointer to start of drawable */
#ifndef POLYSEGMENT
PixelType *addrl; /* address of destination pixmap */
#endif
int nlwidth; /* width in longwords of destination pixmap */
int xorg, yorg; /* origin of window */
int adx; /* abs values of dx and dy */
int ady;
int signdx; /* sign of dx and dy */
int signdy;
int e, e1, e2; /* bresenham error and increments */
int len; /* length of segment */
int axis; /* major axis */
int octant;
unsigned int bias = miGetZeroLineBias(pDrawable->pScreen);
/* a bunch of temporaries */
register int y1, y2;
register int x1, x2;
RegionPtr cclip;
#ifndef POLYSEGMENT
int alu = pGC->alu; /* GJA */
#endif
if (!(pGC->planemask & 0x0F))
return;
cclip = pGC->pCompositeClip;
pboxInit = REGION_RECTS(cclip);
nboxInit = REGION_NUM_RECTS(cclip);
nlwidth = BYTES_PER_LINE(pDrawable) >> 2; /* GJA */
addrlBase = (PixelType *)VIDBASE(pDrawable); /* GJA */
xorg = pDrawable->x;
yorg = pDrawable->y;
#ifdef POLYSEGMENT
while (nseg--)
#else
ppt = pptInit;
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
while(--npt)
#endif
{
nbox = nboxInit;
pbox = pboxInit;
#ifdef POLYSEGMENT
x1 = pSeg->x1 + xorg;
y1 = pSeg->y1 + yorg;
x2 = pSeg->x2 + xorg;
y2 = pSeg->y2 + yorg;
pSeg++;
#else
x1 = x2;
y1 = y2;
++ppt;
if (mode == CoordModePrevious)
{
xorg = x1;
yorg = y1;
}
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
#endif
if (x1 == x2) /* vertical line */
{
/* make the line go top to bottom of screen, keeping
endpoint semantics
*/
if (y1 > y2)
{
register int tmp;
tmp = y2;
y2 = y1 + 1;
y1 = tmp + 1;
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
y1--;
#endif
}
#ifdef POLYSEGMENT
else if (pGC->capStyle != CapNotLast)
y2++;
#endif
/* get to first band that might contain part of line */
while ((nbox) && (pbox->y2 <= y1))
{
pbox++;
nbox--;
}
if (nbox)
{
/* stop when lower edge of box is beyond end of line */
while((nbox) && (y2 >= pbox->y1))
{
if ((x1 >= pbox->x1) && (x1 < pbox->x2))
{
int y1t, y2t;
/* this box has part of the line in it */
y1t = max(y1, pbox->y1);
y2t = min(y2, pbox->y2);
if (y1t != y2t)
{
xf4bppVertS (addrlBase, nlwidth,
x1, y1t, y2t-y1t);
}
}
nbox--;
pbox++;
}
}
#ifndef POLYSEGMENT
y2 = ppt->y + yorg;
#endif
}
else if (y1 == y2) /* horizontal line */
{
/* force line from left to right, keeping
endpoint semantics
*/
if (x1 > x2)
{
register int tmp;
tmp = x2;
x2 = x1 + 1;
x1 = tmp + 1;
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
x1--;
#endif
}
#ifdef POLYSEGMENT
else if (pGC->capStyle != CapNotLast)
x2++;
#endif
/* find the correct band */
while( (nbox) && (pbox->y2 <= y1))
{
pbox++;
nbox--;
}
/* try to draw the line, if we haven't gone beyond it */
if ((nbox) && (pbox->y1 <= y1))
{
int tmp;
/* when we leave this band, we're done */
tmp = pbox->y1;
while((nbox) && (pbox->y1 == tmp))
{
int x1t, x2t;
if (pbox->x2 <= x1)
{
/* skip boxes until one might contain start point */
nbox--;
pbox++;
continue;
}
/* stop if left of box is beyond right of line */
if (pbox->x1 >= x2)
{
nbox = 0;
break;
}
x1t = max(x1, pbox->x1);
x2t = min(x2, pbox->x2);
if (x1t != x2t)
{
xf4bppHorzS (addrlBase, nlwidth,
x1t, y1, x2t-x1t);
}
nbox--;
pbox++;
}
}
#ifndef POLYSEGMENT
x2 = ppt->x + xorg;
#endif
}
else /* sloped line */
{
CalcLineDeltas(x1, y1, x2, y2, adx, ady, signdx, signdy,
1, 1, octant);
if (adx > ady)
{
axis = X_AXIS;
e1 = ady << 1;
e2 = e1 - (adx << 1);
e = e1 - adx;
}
else
{
axis = Y_AXIS;
e1 = adx << 1;
e2 = e1 - (ady << 1);
e = e1 - ady;
SetYMajorOctant(octant);
}
FIXUP_ERROR(e, octant, bias);
/* we have bresenham parameters and two points.
all we have to do now is clip and draw.
*/
while(nbox--)
{
oc1 = 0;
oc2 = 0;
OUTCODES(oc1, x1, y1, pbox);
OUTCODES(oc2, x2, y2, pbox);
if ((oc1 | oc2) == 0)
{
if (axis == X_AXIS)
len = adx;
else
len = ady;
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
len++;
#endif
xf4bppBresS (addrlBase, nlwidth,
signdx, signdy, axis, x1, y1,
e, e1, e2, len);
break;
}
else if (oc1 & oc2)
{
pbox++;
}
else
{
int new_x1 = x1, new_y1 = y1, new_x2 = x2, new_y2 = y2;
int clip1 = 0, clip2 = 0;
int clipdx, clipdy;
int err;
if (miZeroClipLine(pbox->x1, pbox->y1, pbox->x2-1,
pbox->y2-1,
&new_x1, &new_y1, &new_x2, &new_y2,
adx, ady, &clip1, &clip2,
octant, bias, oc1, oc2) == -1)
{
pbox++;
continue;
}
if (axis == X_AXIS)
len = abs(new_x2 - new_x1);
else
len = abs(new_y2 - new_y1);
#ifdef POLYSEGMENT
if (clip2 != 0 || pGC->capStyle != CapNotLast)
len++;
#else
len += (clip2 != 0);
#endif
if (len)
{
/* unwind bresenham error term to first point */
if (clip1)
{
clipdx = abs(new_x1 - x1);
clipdy = abs(new_y1 - y1);
if (axis == X_AXIS)
err = e+((clipdy*e2) + ((clipdx-clipdy)*e1));
else
err = e+((clipdx*e2) + ((clipdy-clipdx)*e1));
}
else
err = e;
xf4bppBresS (addrlBase, nlwidth,
signdx, signdy, axis, new_x1, new_y1,
err, e1, e2, len);
}
pbox++;
}
} /* while (nbox--) */
} /* sloped line */
} /* while (nline--) */
#ifndef POLYSEGMENT
/* paint the last point if the end style isn't CapNotLast.
(Assume that a projecting, butt, or round cap that is one
pixel wide is the same as the single pixel of the endpoint.)
*/
if ((pGC->capStyle != CapNotLast) &&
((ppt->x + xorg != pptInit->x + pDrawable->x) ||
(ppt->y + yorg != pptInit->y + pDrawable->y) ||
(ppt == pptInit + 1)))
{
PixelType _mask;
if (alu == RROP_BLACK)
_mask = mfbGetrmask(x2 & PIM);
else
_mask = mfbGetmask(x2 & PIM);
nbox = nboxInit;
pbox = pboxInit;
while (nbox--)
{
if ((x2 >= pbox->x1) &&
(y2 >= pbox->y1) &&
(x2 < pbox->x2) &&
(y2 < pbox->y2))
{
addrl = mfbScanline(addrlBase, x2, y2, nlwidth);
UPDRW(addrl,_mask);
break;
}
else
pbox++;
}
}
#endif
}
/*
* Draw dashed 1-pixel lines.
*/
#ifdef POLYSEGMENT
static void DoV16SegmentSD(
DrawablePtr, GCPtr, int, xSegment*
);
void
xf4bppSegmentSD (pDrawable, pGC, nseg, pSeg)
DrawablePtr pDrawable;
GCPtr pGC;
int nseg;
register xSegment *pSeg;
{
if ( ! xf86Screens[pDrawable->pScreen->myNum]->vtSema ) {
miPolySegment(pDrawable, pGC, nseg, pSeg);
} else {
DO_WM3(pGC,DoV16SegmentSD (pDrawable, pGC, nseg, pSeg));
}
}
#else
static void DoV16LineSD(
DrawablePtr, GCPtr, int, int, DDXPointPtr
);
void
xf4bppLineSD (pDrawable, pGC, mode, npt, pptInit)
DrawablePtr pDrawable;
GCPtr pGC;
int mode; /* Origin or Previous */
int npt; /* number of points */
DDXPointPtr pptInit;
{
if ( ! xf86Screens[pDrawable->pScreen->myNum]->vtSema ) {
miZeroDashLine(pDrawable, pGC, mode, npt, pptInit);
} else {
DO_WM3(pGC,DoV16LineSD (pDrawable, pGC, mode, npt, pptInit));
}
}
#endif
static void
#ifdef POLYSEGMENT
DoV16SegmentSD (pDrawable, pGC, nseg, pSeg)
DrawablePtr pDrawable;
register GCPtr pGC;
int nseg;
register xSegment *pSeg;
#else
DoV16LineSD( pDrawable, pGC, mode, npt, pptInit)
DrawablePtr pDrawable;
register GCPtr pGC;
int mode; /* Origin or Previous */
int npt; /* number of points */
DDXPointPtr pptInit;
#endif
{
int nboxInit;
register int nbox;
BoxPtr pboxInit;
register BoxPtr pbox;
#ifndef POLYSEGMENT
register DDXPointPtr ppt; /* pointer to list of translated points */
#endif
register unsigned int oc1; /* outcode of point 1 */
register unsigned int oc2; /* outcode of point 2 */
PixelType *addrl; /* address of destination pixmap */
int nlwidth; /* width in longwords of destination pixmap */
int xorg, yorg; /* origin of window */
int adx; /* abs values of dx and dy */
int ady;
int signdx; /* sign of dx and dy */
int signdy;
int e, e1, e2; /* bresenham error and increments */
int len; /* length of segment */
int axis; /* major axis */
int octant;
unsigned int bias = miGetZeroLineBias(pDrawable->pScreen);
int x1, x2, y1, y2;
RegionPtr cclip;
int fgink, bgink; /* GJA */
unsigned char *pDash;
int dashOffset;
int numInDashList;
int dashIndex;
int isDoubleDash;
int dashIndexTmp, dashOffsetTmp;
int unclippedlen;
if (!(pGC->planemask & 0x0F))
return;
cclip = pGC->pCompositeClip;
fgink = bgink = pGC->fgPixel; /* GJA */
pboxInit = REGION_RECTS(cclip);
nboxInit = REGION_NUM_RECTS(cclip);
nlwidth = BYTES_PER_LINE(pDrawable) >> 2; /* GJA */
addrl = (PixelType *)VIDBASE(pDrawable); /* GJA */
/* compute initial dash values */
pDash = (unsigned char *) pGC->dash;
numInDashList = pGC->numInDashList;
isDoubleDash = (pGC->lineStyle == LineDoubleDash);
dashIndex = 0;
dashOffset = 0;
miStepDash ((int)pGC->dashOffset, &dashIndex, pDash,
numInDashList, &dashOffset);
if (isDoubleDash)
bgink = pGC->bgPixel; /* GJA */
xorg = pDrawable->x;
yorg = pDrawable->y;
#ifdef POLYSEGMENT
while (nseg--)
#else
ppt = pptInit;
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
while(--npt)
#endif
{
nbox = nboxInit;
pbox = pboxInit;
#ifdef POLYSEGMENT
x1 = pSeg->x1 + xorg;
y1 = pSeg->y1 + yorg;
x2 = pSeg->x2 + xorg;
y2 = pSeg->y2 + yorg;
pSeg++;
#else
x1 = x2;
y1 = y2;
++ppt;
if (mode == CoordModePrevious)
{
xorg = x1;
yorg = y1;
}
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
#endif
CalcLineDeltas(x1, y1, x2, y2, adx, ady, signdx, signdy, 1, 1, octant);
if (adx > ady)
{
axis = X_AXIS;
e1 = ady << 1;
e2 = e1 - (adx << 1);
e = e1 - adx;
unclippedlen = adx;
}
else
{
axis = Y_AXIS;
e1 = adx << 1;
e2 = e1 - (ady << 1);
e = e1 - ady;
unclippedlen = ady;
SetYMajorOctant(octant);
}
FIXUP_ERROR(e, octant, bias);
/* we have bresenham parameters and two points.
all we have to do now is clip and draw.
*/
while(nbox--)
{
oc1 = 0;
oc2 = 0;
OUTCODES(oc1, x1, y1, pbox);
OUTCODES(oc2, x2, y2, pbox);
if ((oc1 | oc2) == 0)
{
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
unclippedlen++;
dashIndexTmp = dashIndex;
dashOffsetTmp = dashOffset;
xf4bppBresD (pDrawable, fgink, bgink,
&dashIndexTmp, pDash, numInDashList,
&dashOffsetTmp, isDoubleDash,
addrl, nlwidth,
signdx, signdy, axis, x1, y1,
e, e1, e2, unclippedlen);
break;
#else
xf4bppBresD (pDrawable, fgink, bgink,
&dashIndex, pDash, numInDashList,
&dashOffset, isDoubleDash,
addrl, nlwidth,
signdx, signdy, axis, x1, y1,
e, e1, e2, unclippedlen);
goto dontStep;
#endif
}
else if (oc1 & oc2)
{
pbox++;
}
else /* have to clip */
{
int new_x1 = x1, new_y1 = y1, new_x2 = x2, new_y2 = y2;
int clip1 = 0, clip2 = 0;
int clipdx, clipdy;
int err;
if (miZeroClipLine(pbox->x1, pbox->y1, pbox->x2-1, pbox->y2-1,
&new_x1, &new_y1, &new_x2, &new_y2,
adx, ady, &clip1, &clip2,
octant, bias, oc1, oc2) == -1)
{
pbox++;
continue;
}
dashIndexTmp = dashIndex;
dashOffsetTmp = dashOffset;
if (clip1)
{
int dlen;
if (axis == X_AXIS)
dlen = abs(new_x1 - x1);
else
dlen = abs(new_y1 - y1);
miStepDash (dlen, &dashIndexTmp, pDash,
numInDashList, &dashOffsetTmp);
}
if (axis == X_AXIS)
len = abs(new_x2 - new_x1);
else
len = abs(new_y2 - new_y1);
#ifdef POLYSEGMENT
if (clip2 != 0 || pGC->capStyle != CapNotLast)
len++;
#else
len += (clip2 != 0);
#endif
if (len)
{
/* unwind bresenham error term to first point */
if (clip1)
{
clipdx = abs(new_x1 - x1);
clipdy = abs(new_y1 - y1);
if (axis == X_AXIS)
err = e+((clipdy*e2) + ((clipdx-clipdy)*e1));
else
err = e+((clipdx*e2) + ((clipdy-clipdx)*e1));
}
else
err = e;
xf4bppBresD (pDrawable, fgink, bgink,
&dashIndexTmp, pDash, numInDashList,
&dashOffsetTmp, isDoubleDash,
addrl, nlwidth,
signdx, signdy, axis, new_x1, new_y1,
err, e1, e2, len);
}
pbox++;
}
} /* while (nbox--) */
#ifndef POLYSEGMENT
/*
* walk the dash list around to the next line
*/
miStepDash (unclippedlen, &dashIndex, pDash,
numInDashList, &dashOffset);
dontStep: ;
#endif
} /* while (nline--) */
#ifndef POLYSEGMENT
/* paint the last point if the end style isn't CapNotLast.
(Assume that a projecting, butt, or round cap that is one
pixel wide is the same as the single pixel of the endpoint.)
*/
if ((pGC->capStyle != CapNotLast) &&
((dashIndex & 1) == 0 || isDoubleDash) &&
((ppt->x + xorg != pptInit->x + pDrawable->x) ||
(ppt->y + yorg != pptInit->y + pDrawable->y) ||
(ppt == pptInit + 1)))
{
nbox = nboxInit;
pbox = pboxInit;
while (nbox--)
{
if ((x2 >= pbox->x1) &&
(y2 >= pbox->y1) &&
(x2 < pbox->x2) &&
(y2 < pbox->y2))
{
unsigned long _mask;
_mask = mfbGetmask(x2 & PIM);
addrl = mfbScanline(addrl, x2, y2, nlwidth);
UPDRW(addrl,_mask);
break;
}
else
pbox++;
}
}
#endif
}
#if 0
#ifndef POLYSEGMENT
/*
the clipping code could be cleaned up some; most of its
mess derives from originally being inline in the line code,
then pulled out to make clipping dashes easier.
*/
int
mfbClipLine(pbox, box,
ppt1Orig, ppt1, ppt2,
adx, ady, signdx, signdy, axis,
pclip1, pclip2)
BoxPtr pbox; /* box to clip to */
BoxRec box; /* box to do calculations with */
DDXPointPtr ppt1Orig, ppt1, ppt2;
int adx, ady;
int signdx, signdy;
register int axis;
int *pclip1, *pclip2;
{
DDXPointRec pt1Orig, pt1, pt2;
register int swapped = 0;
int clipDone = 0;
register unsigned int utmp;
register int oc1, oc2;
int clip1, clip2;
pt1Orig = *ppt1Orig;
pt1 = *ppt1;
pt2 = *ppt2;
clip1 = 0;
clip2 = 0;
do
{
oc1 = 0;
oc2 = 0;
OUTCODES(oc1, pt1.x, pt1.y, pbox);
OUTCODES(oc2, pt2.x, pt2.y, pbox);
if (oc1 & oc2)
clipDone = -1;
else if ((oc1 | oc2) == 0)
{
clipDone = 1;
if (swapped)
{
SWAPPT(pt1, pt2);
SWAPINT(oc1, oc2);
SWAPINT(clip1, clip2);
}
}
else /* have to clip */
{
/* only clip one point at a time */
if (!oc1)
{
SWAPPT(pt1, pt2);
SWAPINT(oc1, oc2);
SWAPINT(clip1, clip2);
swapped = !swapped;
}
clip1 |= oc1;
if (oc1 & OUT_LEFT)
{
pt1.x = box.x1;
utmp = abs(box.x1 - pt1Orig.x);
utmp *= ady;
if(axis==X_AXIS)
{
pt1.y = pt1Orig.y + SignTimes(signdy, round(utmp, adx));
}
else
{
utmp <<= 1;
if (swapped)
utmp += ady;
else
utmp -= ady;
pt1.y = pt1Orig.y + SignTimes(signdy, ceiling(utmp, 2*adx));
if (swapped)
pt1.y -= signdy;
}
}
else if (oc1 & OUT_ABOVE)
{
pt1.y = box.y1;
utmp = abs(box.y1 - pt1Orig.y);
utmp *= adx;
if (axis == Y_AXIS)
{
pt1.x = pt1Orig.x + SignTimes(signdx, round(utmp, ady));
}
else
{
utmp <<= 1;
if (swapped)
utmp += adx;
else
utmp -= adx;
pt1.x = pt1Orig.x + SignTimes(signdx, ceiling(utmp, 2*ady));
if (swapped)
pt1.x -= signdx;
}
}
else if (oc1 & OUT_RIGHT)
{
pt1.x = box.x2;
utmp = abs(pt1Orig.x - box.x2);
utmp *= ady;
if (axis == X_AXIS)
{
pt1.y = pt1Orig.y + SignTimes(signdy, round(utmp, adx));
}
else
{
utmp <<= 1;
if (swapped)
utmp += ady;
else
utmp -= ady;
pt1.y = pt1Orig.y + SignTimes(signdy, ceiling(utmp, 2*adx));
if (swapped)
pt1.y -= signdy;
}
}
else if (oc1 & OUT_BELOW)
{
pt1.y = box.y2;
utmp = abs(pt1Orig.y - box.y2);
utmp *= adx;
if (axis == Y_AXIS)
{
pt1.x = pt1Orig.x + SignTimes(signdx, round(utmp, ady));
}
else
{
utmp <<= 1;
if (swapped)
utmp += adx;
else
utmp -= adx;
pt1.x = pt1Orig.x + SignTimes(signdx, ceiling(utmp, 2*ady));
if (swapped)
pt1.x -= signdx;
}
}
} /* else have to clip */
} while(!clipDone);
*ppt1 = pt1;
*ppt2 = pt2;
*pclip1 = clip1;
*pclip2 = clip2;
return clipDone;
}
#endif
#endif
|
