'\"
'\" Copyright (c) 1996-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" RCS: @(#) $Id: OpenFileChnl.3,v 1.36 2007/12/13 15:22:31 dgp Exp $
.so man.macros
.TH Tcl_OpenFileChannel 3 8.3 Tcl "Tcl Library Procedures"
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
Tcl_OpenFileChannel, Tcl_OpenCommandChannel, Tcl_MakeFileChannel, Tcl_GetChannel, Tcl_GetChannelNames, Tcl_GetChannelNamesEx, Tcl_RegisterChannel, Tcl_UnregisterChannel, Tcl_DetachChannel, Tcl_IsStandardChannel, Tcl_Close, Tcl_ReadChars, Tcl_Read, Tcl_GetsObj, Tcl_Gets, Tcl_WriteObj, Tcl_WriteChars, Tcl_Write, Tcl_Flush, Tcl_Seek, Tcl_Tell, Tcl_TruncateChannel, Tcl_GetChannelOption, Tcl_SetChannelOption, Tcl_Eof, Tcl_InputBlocked, Tcl_InputBuffered, Tcl_OutputBuffered, Tcl_Ungets, Tcl_ReadRaw, Tcl_WriteRaw \- buffered I/O facilities using channels
.SH SYNOPSIS
.nf
\fB#include <tcl.h>\fR
.sp
Tcl_Channel
\fBTcl_OpenFileChannel\fR(\fIinterp, fileName, mode, permissions\fR)
.sp
Tcl_Channel
\fBTcl_OpenCommandChannel\fR(\fIinterp, argc, argv, flags\fR)
.sp
Tcl_Channel
\fBTcl_MakeFileChannel\fR(\fIhandle, readOrWrite\fR)
.sp
Tcl_Channel
\fBTcl_GetChannel\fR(\fIinterp, channelName, modePtr\fR)
.sp
int
\fBTcl_GetChannelNames\fR(\fIinterp\fR)
.sp
int
\fBTcl_GetChannelNamesEx\fR(\fIinterp, pattern\fR)
.sp
void
\fBTcl_RegisterChannel\fR(\fIinterp, channel\fR)
.sp
int
\fBTcl_UnregisterChannel\fR(\fIinterp, channel\fR)
.sp
int
\fBTcl_DetachChannel\fR(\fIinterp, channel\fR)
.sp
int
\fBTcl_IsStandardChannel\fR(\fIchannel\fR)
.sp
int
\fBTcl_Close\fR(\fIinterp, channel\fR)
.sp
int
\fBTcl_ReadChars\fR(\fIchannel, readObjPtr, charsToRead, appendFlag\fR)
.sp
int
\fBTcl_Read\fR(\fIchannel, readBuf, bytesToRead\fR)
.sp
int
\fBTcl_GetsObj\fR(\fIchannel, lineObjPtr\fR)
.sp
int
\fBTcl_Gets\fR(\fIchannel, lineRead\fR)
.sp
int
\fBTcl_Ungets\fR(\fIchannel, input, inputLen, addAtEnd\fR)
.sp
int
\fBTcl_WriteObj\fR(\fIchannel, writeObjPtr\fR)
.sp
int
\fBTcl_WriteChars\fR(\fIchannel, charBuf, bytesToWrite\fR)
.sp
int
\fBTcl_Write\fR(\fIchannel, byteBuf, bytesToWrite\fR)
.sp
int
\fBTcl_ReadRaw\fR(\fIchannel, readBuf, bytesToRead\fR)
.sp
int
\fBTcl_WriteRaw\fR(\fIchannel, byteBuf, bytesToWrite\fR)
.sp
int
\fBTcl_Eof\fR(\fIchannel\fR)
.sp
int
\fBTcl_Flush\fR(\fIchannel\fR)
.sp
int
\fBTcl_InputBlocked\fR(\fIchannel\fR)
.sp
int
\fBTcl_InputBuffered\fR(\fIchannel\fR)
.sp
int
\fBTcl_OutputBuffered\fR(\fIchannel\fR)
.sp
Tcl_WideInt
\fBTcl_Seek\fR(\fIchannel, offset, seekMode\fR)
.sp
Tcl_WideInt
\fBTcl_Tell\fR(\fIchannel\fR)
.sp
.VS 8.5
int
\fBTcl_TruncateChannel\fR(\fIchannel, length\fR)
.VE 8.5
.sp
int
\fBTcl_GetChannelOption\fR(\fIinterp, channel, optionName, optionValue\fR)
.sp
int
\fBTcl_SetChannelOption\fR(\fIinterp, channel, optionName, newValue\fR)
.sp
.SH ARGUMENTS
.AS Tcl_DString *channelName in/out
.AP Tcl_Interp *interp in
Used for error reporting and to look up a channel registered in it.
.AP "const char" *fileName in
The name of a local or network file.
.AP "const char" *mode in
Specifies how the file is to be accessed.  May have any of the values
allowed for the \fImode\fR argument to the Tcl \fBopen\fR command.  
.AP int permissions in
POSIX-style permission flags such as 0644.  If a new file is created, these
permissions will be set on the created file.
.AP int argc in
The number of elements in \fIargv\fR.
.AP "const char" **argv in
Arguments for constructing a command pipeline.  These values have the same
meaning as the non-switch arguments to the Tcl \fBexec\fR command.
.AP int flags in
Specifies the disposition of the stdio handles in pipeline: OR-ed
combination of \fBTCL_STDIN\fR, \fBTCL_STDOUT\fR, \fBTCL_STDERR\fR, and
\fBTCL_ENFORCE_MODE\fR. If \fBTCL_STDIN\fR is set, stdin for the first child
in the pipe is the pipe channel, otherwise it is the same as the standard
input of the invoking process; likewise for \fBTCL_STDOUT\fR and
\fBTCL_STDERR\fR. If \fBTCL_ENFORCE_MODE\fR is not set, then the pipe can
redirect stdio handles to override the stdio handles for which
\fBTCL_STDIN\fR, \fBTCL_STDOUT\fR and \fBTCL_STDERR\fR have been set.  If it
is set, then such redirections cause an error.
.AP ClientData handle in
Operating system specific handle for I/O to a file. For Unix this is a
file descriptor, for Windows it is a HANDLE.
.AP int readOrWrite in
OR-ed combination of \fBTCL_READABLE\fR and \fBTCL_WRITABLE\fR to indicate
what operations are valid on \fIhandle\fR.
.AP "const char" *channelName in
The name of the channel. 
.AP int *modePtr out
Points at an integer variable that will receive an OR-ed combination of
\fBTCL_READABLE\fR and \fBTCL_WRITABLE\fR denoting whether the channel is
open for reading and writing.
.AP "const char" *pattern in
The pattern to match on, passed to Tcl_StringMatch, or NULL.
.AP Tcl_Channel channel in
A Tcl channel for input or output.  Must have been the return value
from a procedure such as \fBTcl_OpenFileChannel\fR.
.AP Tcl_Obj *readObjPtr in/out
A pointer to a Tcl Object in which to store the characters read from the
channel.
.AP int charsToRead in
The number of characters to read from the channel.  If the channel's encoding 
is \fBbinary\fR, this is equivalent to the number of bytes to read from the 
channel.
.AP int appendFlag in
If non-zero, data read from the channel will be appended to the object.
Otherwise, the data will replace the existing contents of the object.
.AP char *readBuf out
A buffer in which to store the bytes read from the channel.
.AP int bytesToRead in
The number of bytes to read from the channel.  The buffer \fIreadBuf\fR must
be large enough to hold this many bytes.
.AP Tcl_Obj *lineObjPtr in/out
A pointer to a Tcl object in which to store the line read from the
channel.  The line read will be appended to the current value of the
object. 
.AP Tcl_DString *lineRead in/out
A pointer to a Tcl dynamic string in which to store the line read from the
channel.  Must have been initialized by the caller.  The line read will be
appended to any data already in the dynamic string.
.AP "const char" *input in
The input to add to a channel buffer.
.AP int inputLen in
Length of the input
.AP int addAtEnd in
Flag indicating whether the input should be added to the end or
beginning of the channel buffer.
.AP Tcl_Obj *writeObjPtr in
A pointer to a Tcl Object whose contents will be output to the channel.
.AP "const char" *charBuf in
A buffer containing the characters to output to the channel.
.AP "const char" *byteBuf in
A buffer containing the bytes to output to the channel.
.AP int bytesToWrite in
The number of bytes to consume from \fIcharBuf\fR or \fIbyteBuf\fR and
output to the channel.
.AP Tcl_WideInt offset in
How far to move the access point in the channel at which the next input or
output operation will be applied, measured in bytes from the position
given by \fIseekMode\fR.  May be either positive or negative.
.AP int seekMode in
Relative to which point to seek; used with \fIoffset\fR to calculate the new
access point for the channel. Legal values are \fBSEEK_SET\fR,
\fBSEEK_CUR\fR, and \fBSEEK_END\fR.
.AP Tcl_WideInt length in
The (non-negative) length to truncate the channel the channel to.
.AP "const char" *optionName in
The name of an option applicable to this channel, such as \fB\-blocking\fR.
May have any of the values accepted by the \fBfconfigure\fR command.
.AP Tcl_DString *optionValue in
Where to store the value of an option or a list of all options and their
values. Must have been initialized by the caller.
.AP "const char" *newValue in
New value for the option given by \fIoptionName\fR.
.BE

.SH DESCRIPTION
.PP
The Tcl channel mechanism provides a device-independent and
platform-independent mechanism for performing buffered input
and output operations on a variety of file, socket, and device
types.
The channel mechanism is extensible to new channel types, by
providing a low-level channel driver for the new type; the channel driver
interface is described in the manual entry for \fBTcl_CreateChannel\fR. The
channel mechanism provides a buffering scheme modeled after
Unix's standard I/O, and it also allows for nonblocking I/O on
channels.
.PP
The procedures described in this manual entry comprise the C APIs of the
generic layer of the channel architecture. For a description of the channel
driver architecture and how to implement channel drivers for new types of
channels, see the manual entry for \fBTcl_CreateChannel\fR.

.SH TCL_OPENFILECHANNEL
.PP
\fBTcl_OpenFileChannel\fR opens a file specified by \fIfileName\fR and
returns a channel handle that can be used to perform input and output on
the file. This API is modeled after the \fBfopen\fR procedure of
the Unix standard I/O library.
The syntax and meaning of all arguments is similar to those
given in the Tcl \fBopen\fR command when opening a file.
If an error occurs while opening the channel, \fBTcl_OpenFileChannel\fR
returns NULL and records a POSIX error code that can be
retrieved with \fBTcl_GetErrno\fR.
In addition, if \fIinterp\fR is non-NULL, \fBTcl_OpenFileChannel\fR
leaves an error message in \fIinterp\fR's result after any error.  
As of Tcl 8.4, the object-based API \fBTcl_FSOpenFileChannel\fR should 
be used in preference to \fBTcl_OpenFileChannel\fR wherever possible.
.PP
The newly created channel is not registered in the supplied interpreter; to
register it, use \fBTcl_RegisterChannel\fR, described below.
If one of the standard channels, \fBstdin, stdout\fR or \fBstderr\fR was
previously closed, the act of creating the new channel also assigns it as a
replacement for the standard channel.

.SH TCL_OPENCOMMANDCHANNEL
.PP
\fBTcl_OpenCommandChannel\fR provides a C-level interface to the
functions of the \fBexec\fR and \fBopen\fR commands.
It creates a sequence of subprocesses specified
by the \fIargv\fR and \fIargc\fR arguments and returns a channel that can
be used to communicate with these subprocesses.
The \fIflags\fR argument indicates what sort of communication will
exist with the command pipeline.
.PP
If the \fBTCL_STDIN\fR flag is set then the standard input for the
first subprocess will be tied to the channel: writing to the channel
will provide input to the subprocess.  If \fBTCL_STDIN\fR is not set,
then standard input for the first subprocess will be the same as this
application's standard input.  If \fBTCL_STDOUT\fR is set then
standard output from the last subprocess can be read from the channel;
otherwise it goes to this application's standard output.  If
\fBTCL_STDERR\fR is set, standard error output for all subprocesses is
returned to the channel and results in an error when the channel is
closed; otherwise it goes to this application's standard error.  If
\fBTCL_ENFORCE_MODE\fR is not set, then \fIargc\fR and \fIargv\fR can
redirect the stdio handles to override \fBTCL_STDIN\fR,
\fBTCL_STDOUT\fR, and \fBTCL_STDERR\fR; if it is set, then it is an
error for argc and argv to override stdio channels for which
\fBTCL_STDIN\fR, \fBTCL_STDOUT\fR, and \fBTCL_STDERR\fR have been set.
.PP
If an error occurs while opening the channel, \fBTcl_OpenCommandChannel\fR
returns NULL and records a POSIX error code that can be retrieved with
\fBTcl_GetErrno\fR.
In addition, \fBTcl_OpenCommandChannel\fR leaves an error message in
the interpreter's result if \fIinterp\fR is not NULL.
.PP
The newly created channel is not registered in the supplied interpreter; to
register it, use \fBTcl_RegisterChannel\fR, described below.
If one of the standard channels, \fBstdin, stdout\fR or \fBstderr\fR was
previously closed, the act of creating the new channel also assigns it as a
replacement for the standard channel.

.SH TCL_MAKEFILECHANNEL
.PP
\fBTcl_MakeFileChannel\fR makes a \fBTcl_Channel\fR from an existing,
platform-specific, file handle.
The newly created channel is not registered in the supplied interpreter; to
register it, use \fBTcl_RegisterChannel\fR, described below.
If one of the standard channels, \fBstdin, stdout\fR or \fBstderr\fR was
previously closed, the act of creating the new channel also assigns it as a
replacement for the standard channel.

.SH TCL_GETCHANNEL
.PP
\fBTcl_GetChannel\fR returns a channel given the \fIchannelName\fR used to
create it with \fBTcl_CreateChannel\fR and a pointer to a Tcl interpreter in
\fIinterp\fR. If a channel by that name is not registered in that interpreter,
the procedure returns NULL. If the \fImodePtr\fR argument is not NULL, it
points at an integer variable that will receive an OR-ed combination of
\fBTCL_READABLE\fR and \fBTCL_WRITABLE\fR describing whether the channel is
open for reading and writing.
.PP
\fBTcl_GetChannelNames\fR and \fBTcl_GetChannelNamesEx\fR write the
names of the registered channels to the interpreter's result as a
list object.  \fBTcl_GetChannelNamesEx\fR will filter these names
according to the \fIpattern\fR.  If \fIpattern\fR is NULL, then it
will not do any filtering.  The return value is \fBTCL_OK\fR if no
errors occurred writing to the result, otherwise it is \fBTCL_ERROR\fR,
and the error message is left in the interpreter's result.

.SH TCL_REGISTERCHANNEL
.PP
\fBTcl_RegisterChannel\fR adds a channel to the set of channels accessible
in \fIinterp\fR. After this call, Tcl programs executing in that
interpreter can refer to the channel in input or output operations using
the name given in the call to \fBTcl_CreateChannel\fR.  After this call,
the channel becomes the property of the interpreter, and the caller should
not call \fBTcl_Close\fR for the channel; the channel will be closed
automatically when it is unregistered from the interpreter.
.PP
Code executing outside of any Tcl interpreter can call
\fBTcl_RegisterChannel\fR with \fIinterp\fR as NULL, to indicate that it
wishes to hold a reference to this channel. Subsequently, the channel can
be registered in a Tcl interpreter and it will only be closed when the
matching number of calls to \fBTcl_UnregisterChannel\fR have been made.
This allows code executing outside of any interpreter to safely hold a
reference to a channel that is also registered in a Tcl interpreter.
.PP
This procedure interacts with the code managing the standard
channels. If no standard channels were initialized before the first
call to \fBTcl_RegisterChannel\fR, they will get initialized by that
call. See \fBTcl_StandardChannels\fR for a general treatise about
standard channels and the behaviour of the Tcl library with regard to
them.

.SH TCL_UNREGISTERCHANNEL
.PP
\fBTcl_UnregisterChannel\fR removes a channel from the set of channels
accessible in \fIinterp\fR. After this call, Tcl programs will no longer be
able to use the channel's name to refer to the channel in that interpreter.
If this operation removed the last registration of the channel in any
interpreter, the channel is also closed and destroyed.
.PP
Code not associated with a Tcl interpreter can call
\fBTcl_UnregisterChannel\fR with \fIinterp\fR as NULL, to indicate to Tcl
that it no longer holds a reference to that channel. If this is the last
reference to the channel, it will now be closed.  \fBTcl_UnregisterChannel\fR
is very similar to \fBTcl_DetachChannel\fR except that it will also
close the channel if no further references to it exist.

.SH TCL_DETACHCHANNEL
.PP
\fBTcl_DetachChannel\fR removes a channel from the set of channels
accessible in \fIinterp\fR. After this call, Tcl programs will no longer be
able to use the channel's name to refer to the channel in that interpreter.
Beyond that, this command has no further effect.  It cannot be used on
the standard channels (stdout, stderr, stdin), and will return
\fBTCL_ERROR\fR if passed one of those channels.
.PP
Code not associated with a Tcl interpreter can call
\fBTcl_DetachChannel\fR with \fIinterp\fR as NULL, to indicate to Tcl
that it no longer holds a reference to that channel. If this is the last
reference to the channel, unlike \fBTcl_UnregisterChannel\fR, 
it will not be closed.

.SH TCL_ISSTANDARDCHANNEL
.PP
\fBTcl_IsStandardChannel\fR tests whether a channel is one of the
three standard channels, stdin, stdout or stderr.  If so, it returns
1, otherwise 0.
.PP
No attempt is made to check whether the given channel or the standard 
channels are initialized or otherwise valid.

.SH TCL_CLOSE
.PP
\fBTcl_Close\fR destroys the channel \fIchannel\fR, which must denote a
currently open channel. The channel should not be registered in any
interpreter when \fBTcl_Close\fR is called. Buffered output is flushed to
the channel's output device prior to destroying the channel, and any
buffered input is discarded.  If this is a blocking channel, the call does
not return until all buffered data is successfully sent to the channel's
output device.  If this is a nonblocking channel and there is buffered
output that cannot be written without blocking, the call returns
immediately; output is flushed in the background and the channel will be
closed once all of the buffered data has been output.  In this case errors
during flushing are not reported.
.PP
If the channel was closed successfully, \fBTcl_Close\fR returns \fBTCL_OK\fR.
If an error occurs, \fBTcl_Close\fR returns \fBTCL_ERROR\fR and records a
POSIX error code that can be retrieved with \fBTcl_GetErrno\fR.
If the channel is being closed synchronously and an error occurs during
closing of the channel and \fIinterp\fR is not NULL, an error message is
left in the interpreter's result.
.PP
Note: it is not safe to call \fBTcl_Close\fR on a channel that has been
registered using \fBTcl_RegisterChannel\fR; see the documentation for
\fBTcl_RegisterChannel\fR, above, for details. If the channel has ever
been given as the \fBchan\fR argument in a call to
\fBTcl_RegisterChannel\fR, you should instead use
\fBTcl_UnregisterChannel\fR, which will internally call \fBTcl_Close\fR
when all calls to \fBTcl_RegisterChannel\fR have been matched by
corresponding calls to \fBTcl_UnregisterChannel\fR.

.SH "TCL_READCHARS AND TCL_READ"
.PP
\fBTcl_ReadChars\fR consumes bytes from \fIchannel\fR, converting the bytes
to UTF-8 based on the channel's encoding and storing the produced data in 
\fIreadObjPtr\fR's string representation.  The return value of
\fBTcl_ReadChars\fR is the number of characters, up to \fIcharsToRead\fR,
that were stored in \fIreadObjPtr\fR.  If an error occurs while reading, the
return value is \-1 and \fBTcl_ReadChars\fR records a POSIX error code that
can be retrieved with \fBTcl_GetErrno\fR.
.PP
Setting \fIcharsToRead\fR to \fB\-1\fR will cause the command to read
all characters currently available (non-blocking) or everything until
eof (blocking mode).
.PP
The return value may be smaller than the value to read, indicating that less
data than requested was available.  This is called a \fIshort read\fR.  In
blocking mode, this can only happen on an end-of-file.  In nonblocking mode,
a short read can also occur if there is not enough input currently
available:  \fBTcl_ReadChars\fR returns a short count rather than waiting
for more data.
.PP
If the channel is in blocking mode, a return value of zero indicates an
end-of-file condition.  If the channel is in nonblocking mode, a return
value of zero indicates either that no input is currently available or an
end-of-file condition.  Use \fBTcl_Eof\fR and \fBTcl_InputBlocked\fR to tell
which of these conditions actually occurred.
.PP
\fBTcl_ReadChars\fR translates the various end-of-line representations into
the canonical \fB\en\fR internal representation according to the current
end-of-line recognition mode.  End-of-line recognition and the various
platform-specific modes are described in the manual entry for the Tcl
\fBfconfigure\fR command.
.PP
As a performance optimization, when reading from a channel with the encoding
\fBbinary\fR, the bytes are not converted to UTF-8 as they are read.
Instead, they are stored in \fIreadObjPtr\fR's internal representation as a
byte-array object.  The string representation of this object will only be
constructed if it is needed (e.g., because of a call to
\fBTcl_GetStringFromObj\fR).  In this way, byte-oriented data can be read
from a channel, manipulated by calling \fBTcl_GetByteArrayFromObj\fR and
related functions, and then written to a channel without the expense of ever
converting to or from UTF-8.
.PP
\fBTcl_Read\fR is similar to \fBTcl_ReadChars\fR, except that it does not do
encoding conversions, regardless of the channel's encoding.  It is deprecated
and exists for backwards compatibility with non-internationalized Tcl
extensions.  It consumes bytes from \fIchannel\fR and stores them in
\fIreadBuf\fR, performing end-of-line translations on the way.  The return value
of \fBTcl_Read\fR is the number of bytes, up to \fIbytesToRead\fR, written in
\fIreadBuf\fR.  The buffer produced by \fBTcl_Read\fR is not null-terminated.
Its contents are valid from the zeroth position up to and excluding the
position indicated by the return value.  
.PP
\fBTcl_ReadRaw\fR is the same as \fBTcl_Read\fR but does not
compensate for stacking. While \fBTcl_Read\fR (and the other functions
in the API) always get their data from the topmost channel in the
stack the supplied channel is part of, \fBTcl_ReadRaw\fR does
not. Thus this function is \fBonly\fR usable for transformational
channel drivers, i.e. drivers used in the middle of a stack of
channels, to move data from the channel below into the transformation.

.SH "TCL_GETSOBJ AND TCL_GETS"
.PP
\fBTcl_GetsObj\fR consumes bytes from \fIchannel\fR, converting the bytes to
UTF-8 based on the channel's encoding, until a full line of input has been
seen.  If the channel's encoding is \fBbinary\fR, each byte read from the
channel is treated as an individual Unicode character.  All of the
characters of the line except for the terminating end-of-line character(s)
are appended to \fIlineObjPtr\fR's string representation.  The end-of-line
character(s) are read and discarded.
.PP
If a line was successfully read, the return value is greater than or equal
to zero and indicates the number of bytes stored in \fIlineObjPtr\fR.  If an
error occurs, \fBTcl_GetsObj\fR returns \-1 and records a POSIX error code
that can be retrieved with \fBTcl_GetErrno\fR.  \fBTcl_GetsObj\fR also
returns \-1 if the end of the file is reached; the \fBTcl_Eof\fR procedure
can be used to distinguish an error from an end-of-file condition.
.PP
If the channel is in nonblocking mode, the return value can also be \-1 if
no data was available or the data that was available did not contain an
end-of-line character.  When \-1 is returned, the \fBTcl_InputBlocked\fR
procedure may be invoked to determine if the channel is blocked because
of input unavailability.
.PP
\fBTcl_Gets\fR is the same as \fBTcl_GetsObj\fR except the resulting
characters are appended to the dynamic string given by
\fIlineRead\fR rather than a Tcl object.

.SH "TCL_UNGETS"
.PP
\fBTcl_Ungets\fR is used to add data to the input queue of a channel,
at either the head or tail of the queue.  The pointer \fIinput\fR points
to the data that is to be added.  The length of the input to add is given
by \fIinputLen\fR.  A non-zero value of \fIaddAtEnd\fR indicates that the
data is to be added at the end of queue; otherwise it will be added at the
head of the queue.  If \fIchannel\fR has a
.QW sticky
EOF set, no data will be
added to the input queue.  \fBTcl_Ungets\fR returns \fIinputLen\fR or
\-1 if an error occurs.

.SH "TCL_WRITECHARS, TCL_WRITEOBJ, AND TCL_WRITE"
.PP
\fBTcl_WriteChars\fR accepts \fIbytesToWrite\fR bytes of character data at
\fIcharBuf\fR.  The UTF-8 characters in the buffer are converted to the
channel's encoding and queued for output to \fIchannel\fR.  If
\fIbytesToWrite\fR is negative, \fBTcl_WriteChars\fR expects \fIcharBuf\fR
to be null-terminated and it outputs everything up to the null.
.PP
Data queued for output may not appear on the output device immediately, due
to internal buffering.  If the data should appear immediately, call
\fBTcl_Flush\fR after the call to \fBTcl_WriteChars\fR, or set the 
\fB\-buffering\fR option on the channel to \fBnone\fR.  If you wish the data
to appear as soon as a complete line is accepted for output, set the
\fB\-buffering\fR option on the channel to \fBline\fR mode.
.PP
The return value of \fBTcl_WriteChars\fR is a count of how many bytes were
accepted for output to the channel.  This is either greater than zero to
indicate success or \-1 to indicate that an error occurred.  If an error
occurs, \fBTcl_WriteChars\fR records a POSIX error code that may be
retrieved with \fBTcl_GetErrno\fR.
.PP
Newline characters in the output data are translated to platform-specific
end-of-line sequences according to the \fB\-translation\fR option for the
channel.  This is done even if the channel has no encoding.
.PP
\fBTcl_WriteObj\fR is similar to \fBTcl_WriteChars\fR except it
accepts a Tcl object whose contents will be output to the channel.  The
UTF-8 characters in \fIwriteObjPtr\fR's string representation are converted
to the channel's encoding and queued for output to \fIchannel\fR.  
As a performance optimization, when writing to a channel with the encoding
\fBbinary\fR, UTF-8 characters are not converted as they are written.
Instead, the bytes in \fIwriteObjPtr\fR's internal representation as a
byte-array object are written to the channel.  The byte-array representation
of the object will be constructed if it is needed.  In this way,
byte-oriented data can be read from a channel, manipulated by calling
\fBTcl_GetByteArrayFromObj\fR and related functions, and then written to a
channel without the expense of ever converting to or from UTF-8.
.PP
\fBTcl_Write\fR is similar to \fBTcl_WriteChars\fR except that it does not do
encoding conversions, regardless of the channel's encoding.  It is
deprecated and exists for backwards compatibility with non-internationalized
Tcl extensions.  It accepts \fIbytesToWrite\fR bytes of data at
\fIbyteBuf\fR and queues them for output to \fIchannel\fR.  If
\fIbytesToWrite\fR is negative, \fBTcl_Write\fR expects \fIbyteBuf\fR to be
null-terminated and it outputs everything up to the null.
.PP
\fBTcl_WriteRaw\fR is the same as \fBTcl_Write\fR but does not
compensate for stacking. While \fBTcl_Write\fR (and the other
functions in the API) always feed their input to the topmost channel
in the stack the supplied channel is part of, \fBTcl_WriteRaw\fR does
not. Thus this function is \fBonly\fR usable for transformational
channel drivers, i.e. drivers used in the middle of a stack of
channels, to move data from the transformation into the channel below
it.

.SH TCL_FLUSH
.PP
\fBTcl_Flush\fR causes all of the buffered output data for \fIchannel\fR
to be written to its underlying file or device as soon as possible.
If the channel is in blocking mode, the call does not return until
all the buffered data has been sent to the channel or some error occurred.
The call returns immediately if the channel is nonblocking; it starts
a background flush that will write the buffered data to the channel
eventually, as fast as the channel is able to absorb it.
.PP
The return value is normally \fBTCL_OK\fR.
If an error occurs, \fBTcl_Flush\fR returns \fBTCL_ERROR\fR and
records a POSIX error code that can be retrieved with \fBTcl_GetErrno\fR.

.SH TCL_SEEK
.PP
\fBTcl_Seek\fR moves the access point in \fIchannel\fR where subsequent
data will be read or written. Buffered output is flushed to the channel and
buffered input is discarded, prior to the seek operation.
.PP
\fBTcl_Seek\fR normally returns the new access point.
If an error occurs, \fBTcl_Seek\fR returns \-1 and records a POSIX error
code that can be retrieved with \fBTcl_GetErrno\fR.
After an error, the access point may or may not have been moved.

.SH TCL_TELL
.PP
\fBTcl_Tell\fR returns the current access point for a channel. The returned
value is \-1 if the channel does not support seeking.

.SH TCL_TRUNCATECHANNEL
.PP
.VS 8.5
\fBTcl_TruncateChannel\fR truncates the file underlying \fIchannel\fR
to a given \fIlength\fR of bytes. It returns \fBTCL_OK\fR if the
operation succeeded, and \fBTCL_ERROR\fR otherwise.
.VE 8.5

.SH TCL_GETCHANNELOPTION
.PP
\fBTcl_GetChannelOption\fR retrieves, in \fIoptionValue\fR, the value of one of
the options currently in effect for a channel, or a list of all options and
their values.  The \fIchannel\fR argument identifies the channel for which
to query an option or retrieve all options and their values.
If \fIoptionName\fR is not NULL, it is the name of the
option to query; the option's value is copied to the Tcl dynamic string
denoted by \fIoptionValue\fR. If
\fIoptionName\fR is NULL, the function stores an alternating list of option
names and their values in \fIoptionValue\fR, using a series of calls to
\fBTcl_DStringAppendElement\fR. The various preexisting options and
their possible values are described in the manual entry for the Tcl
\fBfconfigure\fR command. Other options can be added by each channel type.
These channel type specific options are described in the manual entry for
the Tcl command that creates a channel of that type; for example, the
additional options for TCP based channels are described in the manual entry
for the Tcl \fBsocket\fR command.
The procedure normally returns \fBTCL_OK\fR. If an error occurs, it returns
\fBTCL_ERROR\fR and calls \fBTcl_SetErrno\fR to store an appropriate POSIX
error code.

.SH TCL_SETCHANNELOPTION
.PP
\fBTcl_SetChannelOption\fR sets a new value \fInewValue\fR
for an option \fIoptionName\fR on \fIchannel\fR.
The procedure normally returns \fBTCL_OK\fR.  If an error occurs,
it returns \fBTCL_ERROR\fR;  in addition, if \fIinterp\fR is non-NULL,
\fBTcl_SetChannelOption\fR leaves an error message in the interpreter's result.

.SH TCL_EOF
.PP
\fBTcl_Eof\fR returns a nonzero value if \fIchannel\fR encountered
an end of file during the last input operation.

.SH TCL_INPUTBLOCKED
.PP
\fBTcl_InputBlocked\fR returns a nonzero value if \fIchannel\fR is in
nonblocking mode and the last input operation returned less data than
requested because there was insufficient data available.
The call always returns zero if the channel is in blocking mode.

.SH TCL_INPUTBUFFERED
.PP
\fBTcl_InputBuffered\fR returns the number of bytes of input currently
buffered in the internal buffers for a channel. If the channel is not open
for reading, this function always returns zero.

.SH TCL_OUTPUTBUFFERED
\fBTcl_OutputBuffered\fR returns the number of bytes of output
currently buffered in the internal buffers for a channel. If the
channel is not open for writing, this function always returns zero.

.SH "PLATFORM ISSUES"
.PP
The handles returned from \fBTcl_GetChannelHandle\fR depend on the
platform and the channel type.  On Unix platforms, the handle is
always a Unix file descriptor as returned from the \fBopen\fR system
call.  On Windows platforms, the handle is a file \fBHANDLE\fR when
the channel was created with \fBTcl_OpenFileChannel\fR,
\fBTcl_OpenCommandChannel\fR, or \fBTcl_MakeFileChannel\fR.  Other
channel types may return a different type of handle on Windows
platforms.

.SH "SEE ALSO"
DString(3), fconfigure(n), filename(n), fopen(3), Tcl_CreateChannel(3)

.SH KEYWORDS
access point, blocking, buffered I/O, channel, channel driver, end of file,
flush, input, nonblocking, output, read, seek, write