# This Makefile is for the sdbm extension to perl.
#
# It was generated automatically by MakeMaker version
# 6.03 (Revision: 1.63) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
#       ANY CHANGES MADE HERE WILL BE LOST!
#
#   MakeMaker ARGV: (q[INSTALLDIRS=perl], q[PERL_CORE=1], q[LIBPERL_A=libperl.a])
#
#   MakeMaker Parameters:

#     C => [q[sdbm.c], q[pair.c], q[hash.c]]
#     DEFINE => q[-DSDBM -DDUFF]
#     H => [q[tune.h], q[sdbm.h], q[pair.h], q[$(PERL_INC)/config.h]]
#     INC => q[-I$(PERL_INC)]
#     INST_ARCHLIB => q[.]
#     NAME => q[sdbm]
#     OBJECT => q[$(O_FILES)]
#     SKIP => [q[dynamic], q[dynamic_lib], q[dlsyms]]
#     clean => { FILES=>q[dbu libsdbm.a dbd dba dbe x-dbu *.dir *.pag] }

# --- MakeMaker post_initialize section:


# --- MakeMaker const_config section:

# These definitions are from config.sh (via ../../lib/Config.pm)

# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = cc
CCCDLFLAGS = 
CCDLFLAGS = 
DLEXT = none
DLSRC = dl_none.xs
LD = ld
LDDLFLAGS = 
LDFLAGS = 
LIBC = 
LIB_EXT = .a
OBJ_EXT = .o
OSNAME = plan9
OSVERS = 1
RANLIB = :
SO = so
EXE_EXT = 
FULL_AR = /bin/ar


# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
NAME = sdbm
DISTNAME = sdbm
NAME_SYM = sdbm
VERSION = 
VERSION_SYM = 
XS_VERSION = 
INST_ARCHLIB = ../../../lib
INST_SCRIPT = ../blib/script
INST_BIN = ../blib/bin
INST_LIB = ../../../lib
INSTALLDIRS = site
PREFIX = /usr
SITEPREFIX = /usr
VENDORPREFIX = 
INSTALLPRIVLIB = /sys/lib/perl/5.8.0
INSTALLSITELIB = /sys/lib/perl/5.8.0/site_perl
INSTALLVENDORLIB = 
INSTALLARCHLIB = /sys/lib/perl/5.8.0/386
INSTALLSITEARCH = /sys/lib/perl/5.8.0/site_perl/386
INSTALLVENDORARCH = 
INSTALLBIN = /usr/bin
INSTALLSITEBIN = /usr/bin
INSTALLVENDORBIN = 
INSTALLSCRIPT = /usr/bin
PERL_LIB = ../../../lib
PERL_ARCHLIB = ../../../lib
SITELIBEXP = /sys/lib/perl/5.8.0/site_perl
SITEARCHEXP = /sys/lib/perl/site_perl/386
LIBPERL_A = libperl.a
FIRST_MAKEFILE = Makefile
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_SRC = ../../..
PERL_INC = ../../..
PERL = ../../../miniperl
FULLPERL = ../../../perl
PERLRUN = $(PERL) "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"
FULLPERLRUN = $(FULLPERL) "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"
PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
ABSPERL = /sys/src/cmd/perl-5.8.0/ext/SDBM_File/sdbm/../../../miniperl
ABSPERLRUN = $(ABSPERL) "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"
ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULL_AR = /bin/ar
PERL_CORE = 1
NOOP = $(SHELL) -c true
NOECHO = @

VERSION_MACRO = VERSION
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc

MAKEMAKER = ../../lib/ExtUtils/MakeMaker.pm
MM_VERSION = 6.03

# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE  = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = sdbm
BASEEXT = sdbm
PARENT_NAME = 
DLBASE = $(BASEEXT)
INC = -I$(PERL_INC)
DEFINE = -DSDBM -DDUFF
OBJECT = $(O_FILES)
LDFROM = $(OBJECT)
LINKTYPE = static

# Handy lists of source code files:
XS_FILES= 
C_FILES = sdbm.c \
	pair.c \
	hash.c
O_FILES = sdbm.o \
	pair.o \
	hash.o
H_FILES = tune.h \
	sdbm.h \
	pair.h \
	$(PERL_INC)/config.h
MAN1PODS = 
MAN3PODS = 
INST_MAN1DIR = ../blib/man1
MAN1EXT = 
INSTALLMAN1DIR = /sys/man/1pub
INSTALLSITEMAN1DIR = /usr/man/man$(MAN1EXT)
INST_MAN3DIR = ../blib/man3
MAN3EXT = 
INSTALLMAN3DIR = /sys/man/2pub
INSTALLSITEMAN3DIR = /usr/man/man$(MAN3EXT)
PERM_RW = 644
PERM_RWX = 755

# work around a famous dec-osf make(1) feature(?):
makemakerdflt: all

.SUFFIXES: .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT)

# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that
# some make implementations will delete the Makefile when we rebuild it. Because
# we call false(1) when we rebuild it. So make(1) is not completely wrong when it
# does so. Our milage may vary.
# .PRECIOUS: Makefile    # seems to be not necessary anymore

.PHONY: all config static dynamic test linkext manifest

# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)/Config.pm $(PERL_INC)/config.h

# Where to put things:
INST_LIBDIR      = $(INST_LIB)
INST_ARCHLIBDIR  = $(INST_ARCHLIB)

INST_AUTODIR     = $(INST_LIB)/auto/$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT)

INST_STATIC  = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT)
INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT)
INST_BOOT    = $(INST_ARCHAUTODIR)/$(BASEEXT).bs

EXPORT_LIST = 

PERL_ARCHIVE = 

PERL_ARCHIVE_AFTER = 

TO_INST_PM = 

PM_TO_BLIB = 


# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERLRUN) -e 'use AutoSplit;  autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1) ;'



# --- MakeMaker tool_xsubpp section:

XSUBPPDIR = ../../../lib/ExtUtils
XSUBPP = $(XSUBPPDIR)/xsubpp
XSPROTOARG = 
XSUBPPDEPS = $(XSUBPPDIR)/typemap $(XSUBPP)
XSUBPPARGS = -typemap $(XSUBPPDIR)/typemap
XSUBPP_EXTRA_ARGS = 


# --- MakeMaker tools_other section:

SHELL = /bin/sh
CHMOD = chmod
CP = cp
LD = ld
MV = mv
NOOP = $(SHELL) -c true
RM_F = rm -f
RM_RF = rm -rf
TEST_F = test -f
TOUCH = touch
UMASK_NULL = umask 0
DEV_NULL = > /dev/null 2>&1

# The following is a portable way to say mkdir -p
# To see which directories are created, change the if 0 to if 1
MKPATH = $(PERLRUN) "-MExtUtils::Command" -e mkpath

# This helps us to minimize the effect of the .exists files A yet
# better solution would be to have a stable file in the perl
# distribution with a timestamp of zero. But this solution doesn't
# need any changes to the core distribution and works with older perls
EQUALIZE_TIMESTAMP = $(PERLRUN) "-MExtUtils::Command" -e eqtime


# --- MakeMaker dist section skipped.

# --- MakeMaker macro section:


# --- MakeMaker depend section:


# --- MakeMaker cflags section:

CCFLAGS = 
OPTIMIZE = -D_BSD_EXTENSION -D_POSIX_SOURCE -D_SUSV2_SOURCE
PERLTYPE = 
MPOLLUTE = 


# --- MakeMaker const_loadlibs section:

# sdbm might depend on some other libraries:
# See ExtUtils::Liblist for details
#
LD_RUN_PATH = 


# --- MakeMaker const_cccmd section:
CCCMD = $(CC) -c $(PASTHRU_INC) $(INC) \
	$(CCFLAGS) $(OPTIMIZE) \
	$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
	$(XS_DEFINE_VERSION)

# --- MakeMaker post_constants section:

INST_STATIC = libsdbm$(LIB_EXT)


# --- MakeMaker pasthru section:

PASTHRU = LIB="$(LIB)"\
	LIBPERL_A="$(LIBPERL_A)"\
	LINKTYPE="$(LINKTYPE)"\
	PREFIX="$(PREFIX)"\
	OPTIMIZE="$(OPTIMIZE)"\
	PASTHRU_DEFINE="$(PASTHRU_DEFINE)"\
	PASTHRU_INC="$(PASTHRU_INC)"


# --- MakeMaker c_o section:

.c.i:
	/bin/cpp -c $(PASTHRU_INC) $(INC) \
	$(CCFLAGS) $(OPTIMIZE) \
	$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
	$(XS_DEFINE_VERSION) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c > $*.i

.c.s:
	$(CCCMD) -S $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c

.c$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c

.C$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.C

.cpp$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cpp

.cxx$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cxx

.cc$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cc


# --- MakeMaker xs_c section:

.xs.c:
	$(PERLRUN) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $(XSUBPP_EXTRA_ARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c


# --- MakeMaker xs_o section:

.xs$(OBJ_EXT):
	$(PERLRUN) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c


# --- MakeMaker top_targets section:

all :: static
	@$(NOOP)

config ::
	@$(NOOP)

lint:
	lint -abchx $(LIBSRCS)


# This is a workaround, the problem is that our old GNU make exports
# variables into the environment so $(MYEXTLIB) is set in here to this
# value which can not be built.
sdbm/libsdbm.a:
	@$(NOOP)


# --- MakeMaker linkext section:

linkext :: $(LINKTYPE)
	@$(NOOP)


# --- MakeMaker dlsyms section skipped.

# --- MakeMaker dynamic section skipped.

# --- MakeMaker dynamic_bs section:

BOOTSTRAP = sdbm.bs

# As Mkbootstrap might not write a file (if none is required)
# we use touch to prevent make continually trying to remake it.
# The DynaLoader only reads a non-empty file.
$(BOOTSTRAP): Makefile  $(INST_ARCHAUTODIR)/.exists
	@echo "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
	@$(PERLRUN) \
		"-MExtUtils::Mkbootstrap" \
		-e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');"
	@$(TOUCH) $(BOOTSTRAP)
	$(CHMOD) $(PERM_RW) $@

$(INST_BOOT): $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
	@rm -rf $(INST_BOOT)
	-cp $(BOOTSTRAP) $(INST_BOOT)
	$(CHMOD) $(PERM_RW) $@


# --- MakeMaker dynamic_lib section skipped.

# --- MakeMaker static section:

## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
#static :: Makefile $(INST_STATIC) $(INST_PM)
static :: Makefile $(INST_STATIC)
	@$(NOOP)


# --- MakeMaker static_lib section:

$(INST_STATIC): $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)/.exists
	$(RM_RF) $@
	$(FULL_AR) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@
	$(CHMOD) $(PERM_RWX) $@
	@echo "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld


$(INST_ARCHAUTODIR)/.exists :: ../../../perl.h
	@$(MKPATH) $(INST_ARCHAUTODIR)
	@$(EQUALIZE_TIMESTAMP) ../../../perl.h $(INST_ARCHAUTODIR)/.exists

	-@$(CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR)


# --- MakeMaker manifypods section:

manifypods : pure_all
	@$(NOOP)


# --- MakeMaker processPL section:


# --- MakeMaker installbin section:


# --- MakeMaker subdirs section:

# none

# --- MakeMaker clean section:

# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.

clean ::
	-rm -rf dbu libsdbm.a dbd dba dbe x-dbu *.dir *.pag ./blib $(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all perlmain.c tmon.out mon.out so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT) perl.exe perl perl$(EXE_EXT) $(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def lib$(BASEEXT).def $(BASEEXT).exp $(BASEEXT).x core core.*perl.*.? *perl.core
	-mv Makefile Makefile.old $(DEV_NULL)


# --- MakeMaker realclean section:

# Delete temporary files (via clean) and also delete installed files
realclean purge ::  clean
	rm -rf $(INST_AUTODIR) $(INST_ARCHAUTODIR)
	rm -rf $(DISTVNAME)
	rm -f $(INST_DYNAMIC) $(INST_BOOT)
	rm -f $(INST_STATIC)
	rm -rf Makefile Makefile.old


# --- MakeMaker dist_basics section skipped.

# --- MakeMaker dist_core section skipped.

# --- MakeMaker dist_dir section skipped.

# --- MakeMaker dist_test section skipped.

# --- MakeMaker dist_ci section skipped.

# --- MakeMaker install section skipped.

# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
	@$(NOOP)


# --- MakeMaker perldepend section:

# Check for unpropogated config.sh changes. Should never happen.
# We do NOT just update config.h because that is not sufficient.
# An out of date config.h is not fatal but complains loudly!
$(PERL_INC)/config.h: $(PERL_SRC)/config.sh
	-@echo "Warning: $(PERL_INC)/config.h out of date with $(PERL_SRC)/config.sh"; false

$(PERL_ARCHLIB)/Config.pm: $(PERL_SRC)/config.sh
	@echo "Warning: $(PERL_ARCHLIB)/Config.pm may be out of date with $(PERL_SRC)/config.sh"
	cd $(PERL_SRC) && $(MAKE) lib/Config.pm


PERL_HDRS = \
	$(PERL_INC)/EXTERN.h		\
	$(PERL_INC)/INTERN.h		\
	$(PERL_INC)/XSUB.h		\
	$(PERL_INC)/av.h		\
	$(PERL_INC)/cc_runtime.h	\
	$(PERL_INC)/config.h		\
	$(PERL_INC)/cop.h		\
	$(PERL_INC)/cv.h		\
	$(PERL_INC)/dosish.h		\
	$(PERL_INC)/embed.h		\
	$(PERL_INC)/embedvar.h		\
	$(PERL_INC)/fakethr.h		\
	$(PERL_INC)/form.h		\
	$(PERL_INC)/gv.h		\
	$(PERL_INC)/handy.h		\
	$(PERL_INC)/hv.h		\
	$(PERL_INC)/intrpvar.h		\
	$(PERL_INC)/iperlsys.h		\
	$(PERL_INC)/keywords.h		\
	$(PERL_INC)/mg.h		\
	$(PERL_INC)/nostdio.h		\
	$(PERL_INC)/op.h		\
	$(PERL_INC)/opcode.h		\
	$(PERL_INC)/opnames.h		\
	$(PERL_INC)/patchlevel.h	\
	$(PERL_INC)/perl.h		\
	$(PERL_INC)/perlapi.h		\
	$(PERL_INC)/perlio.h		\
	$(PERL_INC)/perlsdio.h		\
	$(PERL_INC)/perlsfio.h		\
	$(PERL_INC)/perlvars.h		\
	$(PERL_INC)/perly.h		\
	$(PERL_INC)/pp.h		\
	$(PERL_INC)/pp_proto.h		\
	$(PERL_INC)/proto.h		\
	$(PERL_INC)/regcomp.h		\
	$(PERL_INC)/regexp.h		\
	$(PERL_INC)/regnodes.h		\
	$(PERL_INC)/scope.h		\
	$(PERL_INC)/sv.h		\
	$(PERL_INC)/thrdvar.h		\
	$(PERL_INC)/thread.h		\
	$(PERL_INC)/unixish.h		\
	$(PERL_INC)/utf8.h		\
	$(PERL_INC)/util.h		\
	$(PERL_INC)/warnings.h

$(OBJECT) : $(PERL_HDRS)


# --- MakeMaker makefile section:

$(OBJECT) : $(FIRST_MAKEFILE)

# We take a very conservative approach here, but it\'s worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
Makefile : Makefile.PL $(CONFIGDEP)
	@echo "Makefile out-of-date with respect to $?"
	@echo "Cleaning current config before rebuilding Makefile..."
	-@$(RM_F) Makefile.old
	-@$(MV) Makefile Makefile.old
	-$(MAKE) -f Makefile.old clean $(DEV_NULL) || $(NOOP)
	$(PERLRUN) Makefile.PL "INSTALLDIRS=perl" "PERL_CORE=1" "LIBPERL_A=libperl.a"
	@echo "==> Your Makefile has been rebuilt. <=="
	@echo "==> Please rerun the make command.  <=="
	false



# --- MakeMaker staticmake section:

# --- MakeMaker makeaperl section ---
MAP_TARGET    = ../perl
FULLPERL      = ../../../perl


# --- MakeMaker test section:

TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TEST_FILES = 
TESTDB_SW = -d

testdb :: testdb_$(LINKTYPE)

test :: $(TEST_TYPE)
	@echo 'No tests defined for $(NAME) extension.'

test_dynamic :: pure_all

testdb_dynamic :: pure_all
	PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE)

test_ : test_dynamic

test_static :: pure_all $(MAP_TARGET)

testdb_static :: pure_all $(MAP_TARGET)
	PERL_DL_NONLAZY=1 ./$(MAP_TARGET) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE)



# --- MakeMaker ppd section:
# Creates a PPD (Perl Package Description) for a binary distribution.
ppd:
	@$(PERL) -e "print qq{<SOFTPKG NAME=\"$(DISTNAME)\" VERSION=\"0,0,0,0\">\n\t<TITLE>$(DISTNAME)</TITLE>\n\t<ABSTRACT></ABSTRACT>\n\t<AUTHOR></AUTHOR>\n}" > $(DISTNAME).ppd
	@$(PERL) -e "print qq{\t<IMPLEMENTATION>\n}" >> $(DISTNAME).ppd
	@$(PERL) -e "print qq{\t\t<OS NAME=\"$(OSNAME)\" />\n\t\t<ARCHITECTURE NAME=\"386\" />\n\t\t<CODEBASE HREF=\"\" />\n\t</IMPLEMENTATION>\n</SOFTPKG>\n}" >> $(DISTNAME).ppd

# --- MakeMaker pm_to_blib section:

pm_to_blib: $(TO_INST_PM)
	@$(PERLRUNINST) "-MExtUtils::Install" \
	-e "pm_to_blib({qw{}},'$(INST_LIB)/auto','$(PM_FILTER)')"
	@$(TOUCH) $@

# --- MakeMaker selfdocument section:


# --- MakeMaker postamble section:


# End.