=head1 NAME
perluniintro - Perl Unicode introduction
=head1 DESCRIPTION
This document gives a general idea of Unicode and how to use Unicode
in Perl.
=head2 Unicode
Unicode is a character set standard which plans to codify all of the
writing systems of the world, plus many other symbols.
Unicode and ISO/IEC 10646 are coordinated standards that provide code
points for characters in almost all modern character set standards,
covering more than 30 writing systems and hundreds of languages,
including all commercially-important modern languages. All characters
in the largest Chinese, Japanese, and Korean dictionaries are also
encoded. The standards will eventually cover almost all characters in
more than 250 writing systems and thousands of languages.
A Unicode I<character> is an abstract entity. It is not bound to any
particular integer width, especially not to the C language C<char>.
Unicode is language-neutral and display-neutral: it does not encode the
language of the text and it does not define fonts or other graphical
layout details. Unicode operates on characters and on text built from
those characters.
Unicode defines characters like C<LATIN CAPITAL LETTER A> or C<GREEK
SMALL LETTER ALPHA> and unique numbers for the characters, in this
case 0x0041 and 0x03B1, respectively. These unique numbers are called
I<code points>.
The Unicode standard prefers using hexadecimal notation for the code
points. If numbers like C<0x0041> are unfamiliar to
you, take a peek at a later section, L</"Hexadecimal Notation">.
The Unicode standard uses the notation C<U+0041 LATIN CAPITAL LETTER A>,
to give the hexadecimal code point and the normative name of
the character.
Unicode also defines various I<properties> for the characters, like
"uppercase" or "lowercase", "decimal digit", or "punctuation";
these properties are independent of the names of the characters.
Furthermore, various operations on the characters like uppercasing,
lowercasing, and collating (sorting) are defined.
A Unicode character consists either of a single code point, or a
I<base character> (like C<LATIN CAPITAL LETTER A>), followed by one or
more I<modifiers> (like C<COMBINING ACUTE ACCENT>). This sequence of
base character and modifiers is called a I<combining character
sequence>.
Whether to call these combining character sequences "characters"
depends on your point of view. If you are a programmer, you probably
would tend towards seeing each element in the sequences as one unit,
or "character". The whole sequence could be seen as one "character",
however, from the user's point of view, since that's probably what it
looks like in the context of the user's language.
With this "whole sequence" view of characters, the total number of
characters is open-ended. But in the programmer's "one unit is one
character" point of view, the concept of "characters" is more
deterministic. In this document, we take that second point of view:
one "character" is one Unicode code point, be it a base character or
a combining character.
For some combinations, there are I<precomposed> characters.
C<LATIN CAPITAL LETTER A WITH ACUTE>, for example, is defined as
a single code point. These precomposed characters are, however,
only available for some combinations, and are mainly
meant to support round-trip conversions between Unicode and legacy
standards (like the ISO 8859). In the general case, the composing
method is more extensible. To support conversion between
different compositions of the characters, various I<normalization
forms> to standardize representations are also defined.
Because of backward compatibility with legacy encodings, the "a unique
number for every character" idea breaks down a bit: instead, there is
"at least one number for every character". The same character could
be represented differently in several legacy encodings. The
converse is also not true: some code points do not have an assigned
character. Firstly, there are unallocated code points within
otherwise used blocks. Secondly, there are special Unicode control
characters that do not represent true characters.
A common myth about Unicode is that it would be "16-bit", that is,
Unicode is only represented as C<0x10000> (or 65536) characters from
C<0x0000> to C<0xFFFF>. B<This is untrue.> Since Unicode 2.0, Unicode
has been defined all the way up to 21 bits (C<0x10FFFF>), and since
Unicode 3.1, characters have been defined beyond C<0xFFFF>. The first
C<0x10000> characters are called the I<Plane 0>, or the I<Basic
Multilingual Plane> (BMP). With Unicode 3.1, 17 planes in all are
defined--but nowhere near full of defined characters, yet.
Another myth is that the 256-character blocks have something to
do with languages--that each block would define the characters used
by a language or a set of languages. B<This is also untrue.>
The division into blocks exists, but it is almost completely
accidental--an artifact of how the characters have been and
still are allocated. Instead, there is a concept called I<scripts>,
which is more useful: there is C<Latin> script, C<Greek> script, and
so on. Scripts usually span varied parts of several blocks.
For further information see L<Unicode::UCD>.
The Unicode code points are just abstract numbers. To input and
output these abstract numbers, the numbers must be I<encoded> somehow.
Unicode defines several I<character encoding forms>, of which I<UTF-8>
is perhaps the most popular. UTF-8 is a variable length encoding that
encodes Unicode characters as 1 to 6 bytes (only 4 with the currently
defined characters). Other encodings include UTF-16 and UTF-32 and their
big- and little-endian variants (UTF-8 is byte-order independent)
The ISO/IEC 10646 defines the UCS-2 and UCS-4 encoding forms.
For more information about encodings--for instance, to learn what
I<surrogates> and I<byte order marks> (BOMs) are--see L<perlunicode>.
=head2 Perl's Unicode Support
Starting from Perl 5.6.0, Perl has had the capacity to handle Unicode
natively. Perl 5.8.0, however, is the first recommended release for
serious Unicode work. The maintenance release 5.6.1 fixed many of the
problems of the initial Unicode implementation, but for example
regular expressions still do not work with Unicode in 5.6.1.
B<Starting from Perl 5.8.0, the use of C<use utf8> is no longer
necessary.> In earlier releases the C<utf8> pragma was used to declare
that operations in the current block or file would be Unicode-aware.
This model was found to be wrong, or at least clumsy: the "Unicodeness"
is now carried with the data, instead of being attached to the
operations. Only one case remains where an explicit C<use utf8> is
needed: if your Perl script itself is encoded in UTF-8, you can use
UTF-8 in your identifier names, and in string and regular expression
literals, by saying C<use utf8>. This is not the default because
scripts with legacy 8-bit data in them would break. See L<utf8>.
=head2 Perl's Unicode Model
Perl supports both pre-5.6 strings of eight-bit native bytes, and
strings of Unicode characters. The principle is that Perl tries to
keep its data as eight-bit bytes for as long as possible, but as soon
as Unicodeness cannot be avoided, the data is transparently upgraded
to Unicode.
Internally, Perl currently uses either whatever the native eight-bit
character set of the platform (for example Latin-1) is, defaulting to
UTF-8, to encode Unicode strings. Specifically, if all code points in
the string are C<0xFF> or less, Perl uses the native eight-bit
character set. Otherwise, it uses UTF-8.
A user of Perl does not normally need to know nor care how Perl
happens to encode its internal strings, but it becomes relevant when
outputting Unicode strings to a stream without a PerlIO layer -- one with
the "default" encoding. In such a case, the raw bytes used internally
(the native character set or UTF-8, as appropriate for each string)
will be used, and a "Wide character" warning will be issued if those
strings contain a character beyond 0x00FF.
For example,
perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
produces a fairly useless mixture of native bytes and UTF-8, as well
as a warning:
Wide character in print at ...
To output UTF-8, use the C<:utf8> output layer. Prepending
binmode(STDOUT, ":utf8");
to this sample program ensures that the output is completely UTF-8,
and removes the program's warning.
If your locale environment variables (C<LANGUAGE>, C<LC_ALL>,
C<LC_CTYPE>, C<LANG>) contain the strings 'UTF-8' or 'UTF8',
regardless of case, then the default encoding of your STDIN, STDOUT,
and STDERR and of B<any subsequent file open>, is UTF-8. Note that
this means that Perl expects other software to work, too: if Perl has
been led to believe that STDIN should be UTF-8, but then STDIN coming
in from another command is not UTF-8, Perl will complain about the
malformed UTF-8.
All features that combine Unicode and I/O also require using the new
PerlIO feature. Almost all Perl 5.8 platforms do use PerlIO, though:
you can see whether yours is by running "perl -V" and looking for
C<useperlio=define>.
=head2 Unicode and EBCDIC
Perl 5.8.0 also supports Unicode on EBCDIC platforms. There,
Unicode support is somewhat more complex to implement since
additional conversions are needed at every step. Some problems
remain, see L<perlebcdic> for details.
In any case, the Unicode support on EBCDIC platforms is better than
in the 5.6 series, which didn't work much at all for EBCDIC platform.
On EBCDIC platforms, the internal Unicode encoding form is UTF-EBCDIC
instead of UTF-8. The difference is that as UTF-8 is "ASCII-safe" in
that ASCII characters encode to UTF-8 as-is, while UTF-EBCDIC is
"EBCDIC-safe".
=head2 Creating Unicode
To create Unicode characters in literals for code points above C<0xFF>,
use the C<\x{...}> notation in double-quoted strings:
my $smiley = "\x{263a}";
Similarly, it can be used in regular expression literals
$smiley =~ /\x{263a}/;
At run-time you can use C<chr()>:
my $hebrew_alef = chr(0x05d0);
See L</"Further Resources"> for how to find all these numeric codes.
Naturally, C<ord()> will do the reverse: it turns a character into
a code point.
Note that C<\x..> (no C<{}> and only two hexadecimal digits), C<\x{...}>,
and C<chr(...)> for arguments less than C<0x100> (decimal 256)
generate an eight-bit character for backward compatibility with older
Perls. For arguments of C<0x100> or more, Unicode characters are
always produced. If you want to force the production of Unicode
characters regardless of the numeric value, use C<pack("U", ...)>
instead of C<\x..>, C<\x{...}>, or C<chr()>.
You can also use the C<charnames> pragma to invoke characters
by name in double-quoted strings:
use charnames ':full';
my $arabic_alef = "\N{ARABIC LETTER ALEF}";
And, as mentioned above, you can also C<pack()> numbers into Unicode
characters:
my $georgian_an = pack("U", 0x10a0);
Note that both C<\x{...}> and C<\N{...}> are compile-time string
constants: you cannot use variables in them. if you want similar
run-time functionality, use C<chr()> and C<charnames::vianame()>.
Also note that if all the code points for pack "U" are below 0x100,
bytes will be generated, just like if you were using C<chr()>.
my $bytes = pack("U*", 0x80, 0xFF);
If you want to force the result to Unicode characters, use the special
C<"U0"> prefix. It consumes no arguments but forces the result to be
in Unicode characters, instead of bytes.
my $chars = pack("U0U*", 0x80, 0xFF);
=head2 Handling Unicode
Handling Unicode is for the most part transparent: just use the
strings as usual. Functions like C<index()>, C<length()>, and
C<substr()> will work on the Unicode characters; regular expressions
will work on the Unicode characters (see L<perlunicode> and L<perlretut>).
Note that Perl considers combining character sequences to be
characters, so for example
use charnames ':full';
print length("\N{LATIN CAPITAL LETTER A}\N{COMBINING ACUTE ACCENT}"), "\n";
will print 2, not 1. The only exception is that regular expressions
have C<\X> for matching a combining character sequence.
Life is not quite so transparent, however, when working with legacy
encodings, I/O, and certain special cases:
=head2 Legacy Encodings
When you combine legacy data and Unicode the legacy data needs
to be upgraded to Unicode. Normally ISO 8859-1 (or EBCDIC, if
applicable) is assumed. You can override this assumption by
using the C<encoding> pragma, for example
use encoding 'latin2'; # ISO 8859-2
in which case literals (string or regular expressions), C<chr()>,
and C<ord()> in your whole script are assumed to produce Unicode
characters from ISO 8859-2 code points. Note that the matching for
encoding names is forgiving: instead of C<latin2> you could have
said C<Latin 2>, or C<iso8859-2>, or other variations. With just
use encoding;
the environment variable C<PERL_ENCODING> will be consulted.
If that variable isn't set, the encoding pragma will fail.
The C<Encode> module knows about many encodings and has interfaces
for doing conversions between those encodings:
use Encode 'from_to';
from_to($data, "iso-8859-3", "utf-8"); # from legacy to utf-8
=head2 Unicode I/O
Normally, writing out Unicode data
print FH $some_string_with_unicode, "\n";
produces raw bytes that Perl happens to use to internally encode the
Unicode string. Perl's internal encoding depends on the system as
well as what characters happen to be in the string at the time. If
any of the characters are at code points C<0x100> or above, you will get
a warning. To ensure that the output is explicitly rendered in the
encoding you desire--and to avoid the warning--open the stream with
the desired encoding. Some examples:
open FH, ">:utf8", "file";
open FH, ">:encoding(ucs2)", "file";
open FH, ">:encoding(UTF-8)", "file";
open FH, ">:encoding(shift_jis)", "file";
and on already open streams, use C<binmode()>:
binmode(STDOUT, ":utf8");
binmode(STDOUT, ":encoding(ucs2)");
binmode(STDOUT, ":encoding(UTF-8)");
binmode(STDOUT, ":encoding(shift_jis)");
The matching of encoding names is loose: case does not matter, and
many encodings have several aliases. Note that the C<:utf8> layer
must always be specified exactly like that; it is I<not> subject to
the loose matching of encoding names.
See L<PerlIO> for the C<:utf8> layer, L<PerlIO::encoding> and
L<Encode::PerlIO> for the C<:encoding()> layer, and
L<Encode::Supported> for many encodings supported by the C<Encode>
module.
Reading in a file that you know happens to be encoded in one of the
Unicode or legacy encodings does not magically turn the data into
Unicode in Perl's eyes. To do that, specify the appropriate
layer when opening files
open(my $fh,'<:utf8', 'anything');
my $line_of_unicode = <$fh>;
open(my $fh,'<:encoding(Big5)', 'anything');
my $line_of_unicode = <$fh>;
The I/O layers can also be specified more flexibly with
the C<open> pragma. See L<open>, or look at the following example.
use open ':utf8'; # input and output default layer will be UTF-8
open X, ">file";
print X chr(0x100), "\n";
close X;
open Y, "<file";
printf "%#x\n", ord(<Y>); # this should print 0x100
close Y;
With the C<open> pragma you can use the C<:locale> layer
$ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R';
# the :locale will probe the locale environment variables like LC_ALL
use open OUT => ':locale'; # russki parusski
open(O, ">koi8");
print O chr(0x430); # Unicode CYRILLIC SMALL LETTER A = KOI8-R 0xc1
close O;
open(I, "<koi8");
printf "%#x\n", ord(<I>), "\n"; # this should print 0xc1
close I;
or you can also use the C<':encoding(...)'> layer
open(my $epic,'<:encoding(iso-8859-7)','iliad.greek');
my $line_of_unicode = <$epic>;
These methods install a transparent filter on the I/O stream that
converts data from the specified encoding when it is read in from the
stream. The result is always Unicode.
The L<open> pragma affects all the C<open()> calls after the pragma by
setting default layers. If you want to affect only certain
streams, use explicit layers directly in the C<open()> call.
You can switch encodings on an already opened stream by using
C<binmode()>; see L<perlfunc/binmode>.
The C<:locale> does not currently (as of Perl 5.8.0) work with
C<open()> and C<binmode()>, only with the C<open> pragma. The
C<:utf8> and C<:encoding(...)> methods do work with all of C<open()>,
C<binmode()>, and the C<open> pragma.
Similarly, you may use these I/O layers on output streams to
automatically convert Unicode to the specified encoding when it is
written to the stream. For example, the following snippet copies the
contents of the file "text.jis" (encoded as ISO-2022-JP, aka JIS) to
the file "text.utf8", encoded as UTF-8:
open(my $nihongo, '<:encoding(iso2022-jp)', 'text.jis');
open(my $unicode, '>:utf8', 'text.utf8');
while (<$nihongo>) { print $unicode }
The naming of encodings, both by the C<open()> and by the C<open>
pragma, is similar to the C<encoding> pragma in that it allows for
flexible names: C<koi8-r> and C<KOI8R> will both be understood.
Common encodings recognized by ISO, MIME, IANA, and various other
standardisation organisations are recognised; for a more detailed
list see L<Encode::Supported>.
C<read()> reads characters and returns the number of characters.
C<seek()> and C<tell()> operate on byte counts, as do C<sysread()>
and C<sysseek()>.
Notice that because of the default behaviour of not doing any
conversion upon input if there is no default layer,
it is easy to mistakenly write code that keeps on expanding a file
by repeatedly encoding the data:
# BAD CODE WARNING
open F, "file";
local $/; ## read in the whole file of 8-bit characters
$t = <F>;
close F;
open F, ">:utf8", "file";
print F $t; ## convert to UTF-8 on output
close F;
If you run this code twice, the contents of the F<file> will be twice
UTF-8 encoded. A C<use open ':utf8'> would have avoided the bug, or
explicitly opening also the F<file> for input as UTF-8.
B<NOTE>: the C<:utf8> and C<:encoding> features work only if your
Perl has been built with the new PerlIO feature.
=head2 Displaying Unicode As Text
Sometimes you might want to display Perl scalars containing Unicode as
simple ASCII (or EBCDIC) text. The following subroutine converts
its argument so that Unicode characters with code points greater than
255 are displayed as C<\x{...}>, control characters (like C<\n>) are
displayed as C<\x..>, and the rest of the characters as themselves:
sub nice_string {
join("",
map { $_ > 255 ? # if wide character...
sprintf("\\x{%04X}", $_) : # \x{...}
chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
sprintf("\\x%02X", $_) : # \x..
chr($_) # else as themselves
} unpack("U*", $_[0])); # unpack Unicode characters
}
For example,
nice_string("foo\x{100}bar\n")
returns:
"foo\x{0100}bar\x0A"
=head2 Special Cases
=over 4
=item *
Bit Complement Operator ~ And vec()
The bit complement operator C<~> may produce surprising results if
used on strings containing characters with ordinal values above
255. In such a case, the results are consistent with the internal
encoding of the characters, but not with much else. So don't do
that. Similarly for C<vec()>: you will be operating on the
internally-encoded bit patterns of the Unicode characters, not on
the code point values, which is very probably not what you want.
=item *
Peeking At Perl's Internal Encoding
Normal users of Perl should never care how Perl encodes any particular
Unicode string (because the normal ways to get at the contents of a
string with Unicode--via input and output--should always be via
explicitly-defined I/O layers). But if you must, there are two
ways of looking behind the scenes.
One way of peeking inside the internal encoding of Unicode characters
is to use C<unpack("C*", ...> to get the bytes or C<unpack("H*", ...)>
to display the bytes:
# this prints c4 80 for the UTF-8 bytes 0xc4 0x80
print join(" ", unpack("H*", pack("U", 0x100))), "\n";
Yet another way would be to use the Devel::Peek module:
perl -MDevel::Peek -e 'Dump(chr(0x100))'
That shows the UTF8 flag in FLAGS and both the UTF-8 bytes
and Unicode characters in C<PV>. See also later in this document
the discussion about the C<is_utf8> function of the C<Encode> module.
=back
=head2 Advanced Topics
=over 4
=item *
String Equivalence
The question of string equivalence turns somewhat complicated
in Unicode: what do you mean by "equal"?
(Is C<LATIN CAPITAL LETTER A WITH ACUTE> equal to
C<LATIN CAPITAL LETTER A>?)
The short answer is that by default Perl compares equivalence (C<eq>,
C<ne>) based only on code points of the characters. In the above
case, the answer is no (because 0x00C1 != 0x0041). But sometimes, any
CAPITAL LETTER As should be considered equal, or even As of any case.
The long answer is that you need to consider character normalization
and casing issues: see L<Unicode::Normalize>, Unicode Technical
Reports #15 and #21, I<Unicode Normalization Forms> and I<Case
Mappings>, http://www.unicode.org/unicode/reports/tr15/ and
http://www.unicode.org/unicode/reports/tr21/
As of Perl 5.8.0, the "Full" case-folding of I<Case
Mappings/SpecialCasing> is implemented.
=item *
String Collation
People like to see their strings nicely sorted--or as Unicode
parlance goes, collated. But again, what do you mean by collate?
(Does C<LATIN CAPITAL LETTER A WITH ACUTE> come before or after
C<LATIN CAPITAL LETTER A WITH GRAVE>?)
The short answer is that by default, Perl compares strings (C<lt>,
C<le>, C<cmp>, C<ge>, C<gt>) based only on the code points of the
characters. In the above case, the answer is "after", since
C<0x00C1> > C<0x00C0>.
The long answer is that "it depends", and a good answer cannot be
given without knowing (at the very least) the language context.
See L<Unicode::Collate>, and I<Unicode Collation Algorithm>
http://www.unicode.org/unicode/reports/tr10/
=back
=head2 Miscellaneous
=over 4
=item *
Character Ranges and Classes
Character ranges in regular expression character classes (C</[a-z]/>)
and in the C<tr///> (also known as C<y///>) operator are not magically
Unicode-aware. What this means that C<[A-Za-z]> will not magically start
to mean "all alphabetic letters"; not that it does mean that even for
8-bit characters, you should be using C</[[:alpha:]]/> in that case.
For specifying character classes like that in regular expressions,
you can use the various Unicode properties--C<\pL>, or perhaps
C<\p{Alphabetic}>, in this particular case. You can use Unicode
code points as the end points of character ranges, but there is no
magic associated with specifying a certain range. For further
information--there are dozens of Unicode character classes--see
L<perlunicode>.
=item *
String-To-Number Conversions
Unicode does define several other decimal--and numeric--characters
besides the familiar 0 to 9, such as the Arabic and Indic digits.
Perl does not support string-to-number conversion for digits other
than ASCII 0 to 9 (and ASCII a to f for hexadecimal).
=back
=head2 Questions With Answers
=over 4
=item *
Will My Old Scripts Break?
Very probably not. Unless you are generating Unicode characters
somehow, old behaviour should be preserved. About the only behaviour
that has changed and which could start generating Unicode is the old
behaviour of C<chr()> where supplying an argument more than 255
produced a character modulo 255. C<chr(300)>, for example, was equal
to C<chr(45)> or "-" (in ASCII), now it is LATIN CAPITAL LETTER I WITH
BREVE.
=item *
How Do I Make My Scripts Work With Unicode?
Very little work should be needed since nothing changes until you
generate Unicode data. The most important thing is getting input as
Unicode; for that, see the earlier I/O discussion.
=item *
How Do I Know Whether My String Is In Unicode?
You shouldn't care. No, you really shouldn't. No, really. If you
have to care--beyond the cases described above--it means that we
didn't get the transparency of Unicode quite right.
Okay, if you insist:
use Encode 'is_utf8';
print is_utf8($string) ? 1 : 0, "\n";
But note that this doesn't mean that any of the characters in the
string are necessary UTF-8 encoded, or that any of the characters have
code points greater than 0xFF (255) or even 0x80 (128), or that the
string has any characters at all. All the C<is_utf8()> does is to
return the value of the internal "utf8ness" flag attached to the
C<$string>. If the flag is off, the bytes in the scalar are interpreted
as a single byte encoding. If the flag is on, the bytes in the scalar
are interpreted as the (multi-byte, variable-length) UTF-8 encoded code
points of the characters. Bytes added to an UTF-8 encoded string are
automatically upgraded to UTF-8. If mixed non-UTF8 and UTF-8 scalars
are merged (double-quoted interpolation, explicit concatenation, and
printf/sprintf parameter substitution), the result will be UTF-8 encoded
as if copies of the byte strings were upgraded to UTF-8: for example,
$a = "ab\x80c";
$b = "\x{100}";
print "$a = $b\n";
the output string will be UTF-8-encoded C<ab\x80c\x{100}\n>, but note
that C<$a> will stay byte-encoded.
Sometimes you might really need to know the byte length of a string
instead of the character length. For that use either the
C<Encode::encode_utf8()> function or the C<bytes> pragma and its only
defined function C<length()>:
my $unicode = chr(0x100);
print length($unicode), "\n"; # will print 1
require Encode;
print length(Encode::encode_utf8($unicode)), "\n"; # will print 2
use bytes;
print length($unicode), "\n"; # will also print 2
# (the 0xC4 0x80 of the UTF-8)
=item *
How Do I Detect Data That's Not Valid In a Particular Encoding?
Use the C<Encode> package to try converting it.
For example,
use Encode 'encode_utf8';
if (encode_utf8($string_of_bytes_that_I_think_is_utf8)) {
# valid
} else {
# invalid
}
For UTF-8 only, you can use:
use warnings;
@chars = unpack("U0U*", $string_of_bytes_that_I_think_is_utf8);
If invalid, a C<Malformed UTF-8 character (byte 0x##) in unpack>
warning is produced. The "U0" means "expect strictly UTF-8 encoded
Unicode". Without that the C<unpack("U*", ...)> would accept also
data like C<chr(0xFF>), similarly to the C<pack> as we saw earlier.
=item *
How Do I Convert Binary Data Into a Particular Encoding, Or Vice Versa?
This probably isn't as useful as you might think.
Normally, you shouldn't need to.
In one sense, what you are asking doesn't make much sense: encodings
are for characters, and binary data are not "characters", so converting
"data" into some encoding isn't meaningful unless you know in what
character set and encoding the binary data is in, in which case it's
not just binary data, now is it?
If you have a raw sequence of bytes that you know should be
interpreted via a particular encoding, you can use C<Encode>:
use Encode 'from_to';
from_to($data, "iso-8859-1", "utf-8"); # from latin-1 to utf-8
The call to C<from_to()> changes the bytes in C<$data>, but nothing
material about the nature of the string has changed as far as Perl is
concerned. Both before and after the call, the string C<$data>
contains just a bunch of 8-bit bytes. As far as Perl is concerned,
the encoding of the string remains as "system-native 8-bit bytes".
You might relate this to a fictional 'Translate' module:
use Translate;
my $phrase = "Yes";
Translate::from_to($phrase, 'english', 'deutsch');
## phrase now contains "Ja"
The contents of the string changes, but not the nature of the string.
Perl doesn't know any more after the call than before that the
contents of the string indicates the affirmative.
Back to converting data. If you have (or want) data in your system's
native 8-bit encoding (e.g. Latin-1, EBCDIC, etc.), you can use
pack/unpack to convert to/from Unicode.
$native_string = pack("C*", unpack("U*", $Unicode_string));
$Unicode_string = pack("U*", unpack("C*", $native_string));
If you have a sequence of bytes you B<know> is valid UTF-8,
but Perl doesn't know it yet, you can make Perl a believer, too:
use Encode 'decode_utf8';
$Unicode = decode_utf8($bytes);
You can convert well-formed UTF-8 to a sequence of bytes, but if
you just want to convert random binary data into UTF-8, you can't.
B<Any random collection of bytes isn't well-formed UTF-8>. You can
use C<unpack("C*", $string)> for the former, and you can create
well-formed Unicode data by C<pack("U*", 0xff, ...)>.
=item *
How Do I Display Unicode? How Do I Input Unicode?
See http://www.alanwood.net/unicode/ and
http://www.cl.cam.ac.uk/~mgk25/unicode.html
=item *
How Does Unicode Work With Traditional Locales?
In Perl, not very well. Avoid using locales through the C<locale>
pragma. Use only one or the other.
=back
=head2 Hexadecimal Notation
The Unicode standard prefers using hexadecimal notation because
that more clearly shows the division of Unicode into blocks of 256 characters.
Hexadecimal is also simply shorter than decimal. You can use decimal
notation, too, but learning to use hexadecimal just makes life easier
with the Unicode standard. The C<U+HHHH> notation uses hexadecimal,
for example.
The C<0x> prefix means a hexadecimal number, the digits are 0-9 I<and>
a-f (or A-F, case doesn't matter). Each hexadecimal digit represents
four bits, or half a byte. C<print 0x..., "\n"> will show a
hexadecimal number in decimal, and C<printf "%x\n", $decimal> will
show a decimal number in hexadecimal. If you have just the
"hex digits" of a hexadecimal number, you can use the C<hex()> function.
print 0x0009, "\n"; # 9
print 0x000a, "\n"; # 10
print 0x000f, "\n"; # 15
print 0x0010, "\n"; # 16
print 0x0011, "\n"; # 17
print 0x0100, "\n"; # 256
print 0x0041, "\n"; # 65
printf "%x\n", 65; # 41
printf "%#x\n", 65; # 0x41
print hex("41"), "\n"; # 65
=head2 Further Resources
=over 4
=item *
Unicode Consortium
http://www.unicode.org/
=item *
Unicode FAQ
http://www.unicode.org/unicode/faq/
=item *
Unicode Glossary
http://www.unicode.org/glossary/
=item *
Unicode Useful Resources
http://www.unicode.org/unicode/onlinedat/resources.html
=item *
Unicode and Multilingual Support in HTML, Fonts, Web Browsers and Other Applications
http://www.alanwood.net/unicode/
=item *
UTF-8 and Unicode FAQ for Unix/Linux
http://www.cl.cam.ac.uk/~mgk25/unicode.html
=item *
Legacy Character Sets
http://www.czyborra.com/
http://www.eki.ee/letter/
=item *
The Unicode support files live within the Perl installation in the
directory
$Config{installprivlib}/unicore
in Perl 5.8.0 or newer, and
$Config{installprivlib}/unicode
in the Perl 5.6 series. (The renaming to F<lib/unicore> was done to
avoid naming conflicts with lib/Unicode in case-insensitive filesystems.)
The main Unicode data file is F<UnicodeData.txt> (or F<Unicode.301> in
Perl 5.6.1.) You can find the C<$Config{installprivlib}> by
perl "-V:installprivlib"
You can explore various information from the Unicode data files using
the C<Unicode::UCD> module.
=back
=head1 UNICODE IN OLDER PERLS
If you cannot upgrade your Perl to 5.8.0 or later, you can still
do some Unicode processing by using the modules C<Unicode::String>,
C<Unicode::Map8>, and C<Unicode::Map>, available from CPAN.
If you have the GNU recode installed, you can also use the
Perl front-end C<Convert::Recode> for character conversions.
The following are fast conversions from ISO 8859-1 (Latin-1) bytes
to UTF-8 bytes, the code works even with older Perl 5 versions.
# ISO 8859-1 to UTF-8
s/([\x80-\xFF])/chr(0xC0|ord($1)>>6).chr(0x80|ord($1)&0x3F)/eg;
# UTF-8 to ISO 8859-1
s/([\xC2\xC3])([\x80-\xBF])/chr(ord($1)<<6&0xC0|ord($2)&0x3F)/eg;
=head1 SEE ALSO
L<perlunicode>, L<Encode>, L<encoding>, L<open>, L<utf8>, L<bytes>,
L<perlretut>, L<Unicode::Collate>, L<Unicode::Normalize>, L<Unicode::UCD>
=head1 ACKNOWLEDGMENTS
Thanks to the kind readers of the [email protected],
[email protected], [email protected], and [email protected]
mailing lists for their valuable feedback.
=head1 AUTHOR, COPYRIGHT, AND LICENSE
Copyright 2001-2002 Jarkko Hietaniemi <[email protected]>
This document may be distributed under the same terms as Perl itself.
|
