Plan 9 from Bell Labs’s /usr/web/sources/contrib/quanstro/src/vga/t2r4.c

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


#include <u.h>
#include <libc.h>
#include <bio.h>

#include "pci.h"
#include "vga.h"

/*
 * #9 Ticket to Ride IV.
 */
typedef struct {
	Pcidev*	pci;
	ulong	io;
	uchar*	mmio;

	ulong	ioreg[13];
	ulong	g[25];
	ulong	w[25];
} T2r4;

enum {					/* memory mapped global registers */
	IntVcnt		= 0x20/4,	/* vertical interrupt counter */
	IntHcnt		= 0x24/4,	/* horizontal interrupt counter */
	DbAdr		= 0x28/4,	/* display start address */
	DbPtch		= 0x2C/4,	/* display pitch */
	CrtHac		= 0x30/4,	/* horizontal active line width */
	CrtHbl		= 0x34/4,	/* horizontal blank width */
	CrtHfp		= 0x38/4,	/* horizontal front porch */
	CrtHs		= 0x3C/4,	/* horizontal sync width */
	CrtVac		= 0x40/4,	/* vertical active field width */
	CrtVbl		= 0x44/4,	/* vertical blank width */
	CrtVfp		= 0x48/4,	/* vertical front porch */
	CrtVs		= 0x4C/4,	/* vertical sync width */
	CrtLcnt		= 0x50/4,	/* CRT line counter */
	CrtZoom		= 0x54/4,	/* display zoom factor */
	Crt1con		= 0x58/4,	/* CRT configuration register 1 */
	Crt2con		= 0x5C/4,	/* CRT configuration register 2 */
	DbAdr2		= 0x60/4,	/* CRT display start address 2 */
};

enum {					/* memory windows registers */
	Mw0Ctrl		= 0x00/4,	/* memory window 0 control */
	Mw0Ad		= 0x04/4,	/* memory window 0 address */
	Mw0Sz		= 0x08/4,	/* memory window 0 size */
	Mw0Org		= 0x10/4,	/* memory window 0 origin */
	Mw0Mask		= 0x24/4,	/* Memory window 0 plane mask */
	Mw1Ctlr		= 0x28/4,	/* memory window 1 control */
	Mw1Ad		= 0x2C/4,	/* memory window 1 address */
	Mw1Sz		= 0x30/4,	/* memory window 1 size */
	Mw1Org		= 0x38/4,	/* memory window 1 origin */
	Mw1Mask		= 0x4C/4,	/* Memory window 1 plane mask */
	MwcFcnt		= 0x50/4,	/* memory window cache flush counter */
	MwcFlsh		= 0x54/4,	/* manual cache flush */
	YuvLi		= 0x58/4,	/* YUV LUT index */
	YuvLa		= 0x5C/4,	/* YUV LUT address */
	MwCtrl		= 0x60/4,	/* memory window 0 and 1 control */
};

enum {
	IndexLo		= 4,
	IndexHi		= 5,
	Data		= 6,
	IndexCtl	= 7,
};

static uchar
_rgb524xi(Vga* vga, int index)
{
	ulong *mmio;

	mmio = (ulong*)((T2r4*)vga->private)->mmio;
	mmio[IndexLo] = index & 0xFF;
	mmio[IndexHi] = (index>>8) & 0xFF;

	return mmio[Data];
}

static void
_rgb524xo(Vga* vga, int index, uchar data)
{
	ulong *mmio;

	mmio = (ulong*)((T2r4*)vga->private)->mmio;
	mmio[IndexLo] = index & 0xFF;
	mmio[IndexHi] = (index>>8) & 0xFF;

	mmio[Data] = data;
}

static void
snarf(Vga* vga, Ctlr* ctlr)
{
	ulong *mmio;
	int f, i, x;
	Pcidev *p;
	T2r4 *t2r4;
	ulong *rp;

	if(vga->private == nil){
		vga->private = alloc(sizeof(T2r4));
		if((p = pcimatch(0, 0x105D, 0)) == nil)
			error("%s: not found\n", ctlr->name);
		switch(p->did){
		case 0x5348:			/*  */
			break;
		default:
			error("%s: not found\n", ctlr->name);
		}

		if((f = open("#v/vgactl", OWRITE)) < 0)
			error("%s: can't open vgactl\n", ctlr->name);
		if(write(f, "type t2r4", 9) != 9)
			error("%s: can't set type\n", ctlr->name);
		close(f);
	
		mmio = segattach(0, "t2r4mmio", 0, p->mem[4].size);
		if(mmio == (void*)-1)
			error("%s: can't attach mmio segment\n", ctlr->name);

		t2r4 = vga->private;
		t2r4->pci = p;
		t2r4->io = p->mem[5].bar & ~0x0F;
		t2r4->mmio = (uchar*)mmio;
	}
	t2r4 = vga->private;
	for(i = 0; i < nelem(t2r4->ioreg); i++)
		t2r4->ioreg[i] = inportl(t2r4->io+(i*4));

	x = t2r4->ioreg[7] & 0xFF00001F;		/* config1 */
	outportl(t2r4->io+0x1C, x|0x00331F10);

	x = t2r4->ioreg[8] & 0xFF0FFFFF;		/* config2 */
	outportl(t2r4->io+0x20, x|0x00100000);

	x = inportl(t2r4->io+0x30) & 0xFF;		/* vgactl */
	outportl(t2r4->io+0x30, x|0x82);

	rp = (ulong*)t2r4->mmio;
	for(i = 0; i < nelem(t2r4->g); i++)
		t2r4->g[i] = *rp++;
	rp = (ulong*)(t2r4->mmio+8192);
	for(i = 0; i < nelem(t2r4->w); i++)
		t2r4->w[i] = *rp++;

	vga->vma = vga->vmz = t2r4->pci->mem[0].size;
	ctlr->flag |= Hlinear;

	/*
	 * Currently, the RGB524 has no need of a snarf
	 * routine so this will be called before any RGB524 code.
	 */
	if(vga->ramdac && strncmp(vga->ramdac->name, "rgb524mn", 8) == 0){
		rgb524mnxi = _rgb524xi;
		rgb524mnxo = _rgb524xo;
	}

	ctlr->flag |= Fsnarf;
}

static void
options(Vga* vga, Ctlr* ctlr)
{
	USED(vga);
	ctlr->flag |= Foptions;
}

static void
init(Vga* vga, Ctlr* ctlr)
{
	char *val;
	T2r4 *t2r4;
	int crtclocks, zoom;

	t2r4 = vga->private;
	crtclocks = 64/vga->mode->z;

	zoom = 1;
	if((val = dbattr(vga->mode->attr, "zoom")) && strtol(val, 0, 0))
		zoom = 2;

	t2r4->g[DbAdr] = 0;
	switch(vga->mode->z){
	case 8:
		t2r4->g[DbPtch] = vga->mode->x*1;
		break;
	case 16:
		t2r4->g[DbPtch] = vga->mode->x*2;
		break;
	case 32:
		t2r4->g[DbPtch] = vga->mode->x*4;
		break;
	}
	t2r4->g[CrtHac] = vga->mode->x/crtclocks;
	t2r4->g[CrtHbl] = (vga->mode->ht-vga->mode->x)/crtclocks;
	if(vga->mode->shs == 0)
		vga->mode->shs = vga->mode->shb;
	t2r4->g[CrtHfp] = (vga->mode->shs-vga->mode->x)/crtclocks;
	if(vga->mode->ehs == 0)
		vga->mode->ehs = vga->mode->ehb;
	t2r4->g[CrtHs] = (vga->mode->ehs-vga->mode->shs)/crtclocks;
	t2r4->g[CrtVac] = vga->mode->y * zoom;
	t2r4->g[CrtVbl] = (vga->mode->vt-vga->mode->y) * zoom;
	t2r4->g[CrtVfp] = (vga->mode->vrs-vga->mode->y) * zoom;
	t2r4->g[CrtVs] = (vga->mode->vre-vga->mode->vrs) * zoom;
	t2r4->g[CrtZoom] = 0;

	/*
	 * Turn on the syncs and video.
	 * Bts (bit 0x100) is digital RGB output enable. If there's
	 * a flat-panel then this is hopefully already set by the BIOS,
	 * so don't touch it. (It's possible that bit 0 of SoftSw
	 * indicates flat-panel or CRT).
	 */
	t2r4->g[Crt1con] &= 0x00000100;
	t2r4->g[Crt1con] |= 0x70;
	t2r4->g[Crt2con] = 0x20000100;

	if(zoom == 2)
		t2r4->g[CrtZoom] = 1;

	t2r4->w[Mw0Ctrl] = 0;
	t2r4->w[Mw0Sz] = 0x0D;	/* 32MB */
	t2r4->w[Mw0Org] = 0;
	t2r4->w[Mw0Mask] = 0xFFFFFFFF;

	if(vga->linear && (ctlr->flag & Hlinear))
		ctlr->flag |= Ulinear;

	ctlr->flag |= Finit;
}

static void
load(Vga* vga, Ctlr* ctlr)
{
	T2r4 *t2r4;
	ulong *g, *w;

	t2r4 = vga->private;

	g = (ulong*)t2r4->mmio;
	g[DbAdr] = t2r4->g[DbAdr];
	g[DbPtch] = t2r4->g[DbPtch];
	g[CrtHac] = t2r4->g[CrtHac];
	g[CrtHbl] = t2r4->g[CrtHbl];
	g[CrtHfp] = t2r4->g[CrtHfp];
	g[CrtHs] = t2r4->g[CrtHs];
	g[CrtVac] = t2r4->g[CrtVac];
	g[CrtVbl] = t2r4->g[CrtVbl];
	g[CrtVfp] = t2r4->g[CrtVfp];
	g[CrtVs] = t2r4->g[CrtVs];
	g[Crt1con] = t2r4->g[Crt1con];
	g[Crt2con] = t2r4->g[Crt2con];
	g[CrtZoom] = t2r4->g[CrtZoom];

	w = (ulong*)(t2r4->mmio+8192);
	w[Mw0Ctrl] = t2r4->w[Mw0Ctrl];
	w[Mw0Sz] = t2r4->w[Mw0Sz];
	w[Mw0Org] = t2r4->w[Mw0Org];
	w[Mw0Mask] = t2r4->w[Mw0Mask];

	if(t2r4->g[CrtZoom])
		outportl(t2r4->io+0x30, 0xA2);	/* vgactl */
	else
		outportl(t2r4->io+0x30, 0x82);	/* vgactl */
	outportl(t2r4->io+0x24, 0x211BF030);	/* sgram */
	sleep(500);
	outportl(t2r4->io+0x24, 0xA11BF030);	/* sgram */

	ctlr->flag |= Fload;
}

static void
dump(Vga* vga, Ctlr* ctlr)
{
	int i;
	T2r4 *t2r4;

	t2r4 = vga->private;
	Bprint(&stdout, "\n");
	Bprint(&stdout, "%s ioreg\t\t%8.8luX\n", ctlr->name, t2r4->io);
	Bprint(&stdout, "%s rbase_g\t%8.8luX\n", ctlr->name, t2r4->ioreg[0]);
	Bprint(&stdout, "%s rbase_w\t%8.8luX\n", ctlr->name, t2r4->ioreg[1]);
	Bprint(&stdout, "%s rbase_d\t%8.8luX\n", ctlr->name, t2r4->ioreg[2]);
	Bprint(&stdout, "%s rbase_i\t%8.8luX\n", ctlr->name, t2r4->ioreg[4]);
	Bprint(&stdout, "%s rbase_e\t%8.8luX\n", ctlr->name, t2r4->ioreg[5]);
	Bprint(&stdout, "%s id\t\t\t%8.8luX\n", ctlr->name, t2r4->ioreg[6]);
	Bprint(&stdout, "%s config1\t\t%8.8luX\n", ctlr->name, t2r4->ioreg[7]);
	Bprint(&stdout, "%s config2\t\t%8.8luX\n", ctlr->name, t2r4->ioreg[8]);
	Bprint(&stdout, "%s sgram\t\t%8.8luX\n", ctlr->name, t2r4->ioreg[9]);
	Bprint(&stdout, "%s softsw\t\t%8.8luX\n", ctlr->name, t2r4->ioreg[10]);
	Bprint(&stdout, "%s ddc\t\t%8.8luX\n", ctlr->name, t2r4->ioreg[11]);
	Bprint(&stdout, "%s vgactl\t\t%8.8luX\n", ctlr->name, t2r4->ioreg[12]);

	Bprint(&stdout, "\n");
	for(i = 0; i < nelem(t2r4->g); i++)
		Bprint(&stdout, "%s g reg0x%2.2uX\t\t%8.8luX\n",
			ctlr->name, i*4, t2r4->g[i]);
	Bprint(&stdout, "\n");
	for(i = 0; i < nelem(t2r4->w); i++)
		Bprint(&stdout, "%s w reg0x%2.2uX\t\t%8.8luX\n",
			ctlr->name, i*4, t2r4->w[i]);
}

Ctlr t2r4 = {
	"t2r4",				/* name */
	snarf,				/* snarf */
	options,			/* options */
	init,				/* init */
	load,				/* load */
	dump,				/* dump */
};

Ctlr t2r4hwgc = {
	"t2r4hwgc",			/* name */
	0,				/* snarf */
	0,				/* options */
	0,				/* init */
	0,				/* load */
	0,				/* dump */
};

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to [email protected].